Operator`s manual

Front Panel Operation
5-11
You can exit a menu using several methods:
•
Pressing the Prev Mnu button closes the current menu and moves you back to the previous
menu. If you press it enough times, you will exit all menus.
•
Pressing the Clr Mnu button closes all menus immediately.
•
If you are down several layers in the menus, pressing the Config button once brings you to the
top Configure menu. Pressing it again closes the Configure menu.
Most menu options that are selected take effect immediately. For example, if you want to change the
AVM-510A COLOR LIMITS, you will see the effect right away as long as you are displaying the
limits at that time.
To display the AVM-510A COLOR LIMITS shown in Figure 5-5:
1. Select Input A: or Input B: as the input signal.
2. Press the Mesmnt button to access the Measurement menu.
3. Select SELECT SET, and then select COLOR SETUP.
4. Select COLOR LIMITS and then press the Enter button.
Figure 5-5. Color Limits Screen