Operator`s manual

Front Panel Operation
5-10
•
Any menu option selected takes effect immediately. You must de-select a menu option to erase it.
•
A blue, highlighted cursor indicates the place in the menu structure. You can move the cursor
using the Up and Down arrow buttons.
•
Menu entries in all capital letters indicate that there are sub-menus below that entry.
•
The Blue button is used for quick access to the functions available for the MM-410/AVM-510A.
To use the Blue button, simply press it and then press the button that relates to the function you
want to select.
Refer to “Quick Access to Commonly Used Functions” for a listing of the Blue button
functions.
Choosing Menu Options
You select and choose options in the Configure or Measurement menu using the associated menu
buttons and a knob. You access the Configure menu by pressing the Config button. For the AVM-
510A, you access the Measurement menu by pressing the Mesmnt button. You can then use the Up
and Down arrow buttons to move the cursor through the menu selections. The knob is used to make
sub-selection adjustments to a menu selection.
Pushing the Enter button has two effects, depending on what you have highlighted at the time the
button is pressed (Entr for the AVM-510A). Press the Config button, select an input, and then press
the Enter button to see the following example:
•
If the blue highlighted cursor is on the INPUT menu option that has choices highlighted in white,
such as SLOW and OFF, pressing the Enter button will toggle through these choices (see Figure
5-4).
•
Turning the knob also changes the values or selections for menu options. For example, if the blue
highlighted cursor is on the INPUT menu option that has choices highlighted in white, such as
SLOW and OFF, rotating the knob will also toggle through these choices.
Figure 5-4. Input Screen