Operator`s manual

Product Overview (MM-410)
2-6
MM-410 Rear View
The following cable connectors can be viewed from the rear of the MM-410 (see Figure 2-2).
Legend Connector Function
1
RS-232 Lets you connect to a PC for system updates.
2
Picture monitor
outputs
These outputs (S-video and composite) are available for a picture
monitor display of a picture, waveforms, or signal status.
3
Composite (A) One switchable loop-through composite input.
4
Composite (B),
CPST or G/Y
One switchable loop-through composite, CPST, or G/Y component
input.
5
CNPT (B) One switchable loop-through B/B-Y component input.
6
CNPT (B) One switchable loop-through R/R-Y component input.
7
Power Line voltage power connector (ac input).
8
DC control Lets you select any of the first four memories by grounding (earthing)
pins 1 through 4.
Refer to Chapter 4, “Installation,” for additional information on this
connector.
9
External reference A composite analog external reference signal representing studio
reference timing.
:
S-video
(A or B)
One switchable loop-through S-video input. Can only be selected
using the
Input
menu options.
ALARM
RS232
COMPUTER
OUTPUTS
EXT REF
S-VIDEO (A or B)
COMPOSITE (A)
VIDEO INPUTS
MAGNI SYSTEMS INC., USA
MM-002
9
10
POWER
DC CONTROL
S-VIDEO
CPST
PICTURE MONITOR
COMPOSITE (B)
CPNT (B)
CPST or G/Y B/B-Y R/R-Y
3
4
5 6
2
1
7
8
Figure 2-2. MM-410 Rear View