Operator`s manual

Command Codes (AVM-510A)
E-8
TIMECODE LINE
NOTIFY
‘T’S. .S<CR> Response to TIMECODE LINE REQUEST.
INTENSITY NOTIFY ‘I’N. .N<CR> Response to INTENSITY REQUEST.
N. .N = [1. .127]
1 = minimum intensity
PERSISTENCE
NOTIFY
‘D’N. .N<CR> Response to PERSISTENCE REQUEST.
N. .N = [127. .255]
127 = minimum persistence
255 = infinite persistence
PC to AVM-510A (Commands)
This section describes the commands sent from a PC to the AVM-510A.
EXT REF SET ‘X’N<CR>
N = 0 for off
N = 1 for on
CLAMP SET ‘C’N<CR>
N = 0 for slow
N = 1 for fast
BOWTIE SET ‘W’N<CR>
N = 0 for off
N = 1 for on
LINE SELECT
MODE SET
‘Q’H<CR>
H = 2 for 2 line
H = F for 15 line
+V SWITCH SET ‘+’N<CR>
N = 0 for off
N = 1 for on
100% COLOR BARS
SET
‘O’N<CR>
N = 0 for 75%
N = 1 for 100%