Operator`s manual

D-1

D. Calibration

Introduction

This appendix explains how to access the CALIBRATION menu options for the MM-410

Waveform/Vector Rasterizing Monitor (MM-410) and the AVM-510A Series Automated Video

Monitors (AVM-510A).

CAUTION: Calibration should only be performed by

qualified field service personnel.

NOTE:

Calibration numbers specific to the MM-410/AVM-510A can be found on an

insert supplied with this manual.

To access the CALIBRATION menu options:

Turn the MM-410/AVM-510A on.

2. When the Magni MM-410/AVM-510A screen appears, press the Blue (2nd) button twice.

After the MM-410/AVM-510A completely boots, press the Blue button twice to display the

CALIBRATION menu options.