Operator`s manual

Specifications
A-5
Vector
Description Specification
Display accuracy:
Amplitude error
Phase error
+/– 2%
+/– 1.25º
Chroma bandwidth 700 kHz +/– 100 kHz
Variable gain range - 40 to +/– 20%
Variable phase 360º
Vector MAG x 2.5 typical
Noise (AVM-510A)
Description Specification
Unified weighting filter <–70 dBm noise floor
Audio (AVM-510A)
Description Specification
Impedance > 15 k
Ω
balanced input
Dynamic range
60 dBm with 1 dBm resolution
+8 dBm over reference limit
Maximum input level +20 dBm
Frequency response Flat within +/– 2 dBm from 100 Hz to 20 kHz
Connector type 9-pin D female (male interconnect housing supplied)
Interfaces (MM-410)
•
Ground closure interface:
Logic level interface memory recalled for instrument control through memory settings
Interfaces (AVM-510A)
•
Computer interface: RS-232 control port (9-pin D-sub female)
•
Modem interface: RS-232 interface to modem for instrument control (9-pin D-sub female)
•
Ground closure interface: Logic level interface memory recalled for instrument control through
memory settings (9-pin D-sub female)
•
Control interface: with SDM-550 (AVM-510A-C)