Operator`s manual

Specifications
A-3
Measurement Parameters (AVM-510A)
AUDIO LEVEL (4 CHANNELS
REPORT)
COMPONENT COLOR BAR MEAS.
(AVM-510A-C)
LUMINANCE LINEARITY (PAL)
AVERAGE PICTURE LEVEL (APL) COMPOSITE COLOR BAR MEAS. NOISE
BURST AMPLITUDE DIFFERENTIAL GAIN PEAK LUMINANCE
BURST REFERENCE PHASE DIFFERENTIAL PHASE PEAK VIDEO
CHROMA / LUMA DELAY FREQUENCY RESPONSE PULSE BAR RATIO
CHROMA / LUMA GAIN HORIZONTAL REFERENCE TIMING SCH PHASE
CLOSED CAPTION PRESENCE,
(NTSC)
HORIZONTAL BLANKING WIDTH SYNC AMPLITUDE
COLOR FRAME K-2T FACTOR
ZERO CARRIER REF. PULSE
PRESENCE (AVM-510A-T)
PictureGuard

 (AVM-510A)
•
Composite signal parameters:
– Sync amplitude (loss of video)
– Burst amplitude
– Peak luminance amplitude
– Peak video amplitude
–
Average Picture Level (APL)
– Signal-to-noise ratio
– SCH phase
– Blanking (horizontal) width
– Burst reference phase
– Horizontal reference timing
–
Color frame
–
Close caption
•
Component signal parameters:
–
Sync amplitude (loss of video)
–
Peak video amplitude
–
H-reference timing