Operator`s manual

AVM-510A-C (For Component Measurements)
12-3
Serial Digital Measurement Set (AVM-510A-C and SDM-550)
NOTE:
The digital measurement screen is only active when the AVM-510A-C is
connected to an SDM-550.
The serial digital measuement set screen provides the following information, including numerical data
not present in the picture monitor display (see Figure 12-2).
•
SIG STRENGTH
•
JITTER
•
EDH RATE
•
PEAK VIDEO
To access the serial digital measurement set screen:
1. Press the Mesmnt button.
2. Select SELECT SET and then press the Entr button.
3. Select DIGITAL SET and then press the Entr button.
4. Press the Clr Mnu button to exit.
Figure 12-2. Serial Digital Measurement Screen