Operator`s manual

1-1
1
1. About This Manual
Introduction
This manual describes how to install, configure, and operate the MM-410 Waveform/Vector
Rasterizing Monitor (MM-410) and the AVM-510A Series Automated Video Monitors (AVM-510A).
The information presented will help to familiarize you with all aspects of the MM-410/AVM-510A
and provide a reference tool for questions you might have in the future.
Audience
This guide is written specifically for anyone responsible for installing, configuring, and operating the
MM-410/AVM-510A.
Organization
This manual contains the following:
•
Chapter 1: About This Manual— Describes the organization of this manual. Conventions, special
notices, and safety precautions used throughout the manual are also included.
•
Chapter 2: Product Overview (MM-410)— Describes the features and capabilities of the MM-
410.
•
Chapter 3: Product Overview (AVM-510A)— Describes the features and capabilities of the AVM-
510A.
•
Chapter 4: Installation— Describes how to connect and configure the MM-410/AVM-510A.
•
Chapter 5: Front Panel Operation— Explains how to use the MM-410/AVM-510A front panel
menu buttons.
•
Chapter 6: Operating the MM-410/AVM-510A — Explains how to operate the AVM-510A/
MM-410 using the menu options that are accessible from the front panel.
•
Chapter 7: Viewing Waveforms, Vectors, and Pictures — Explains how to view waveforms,
vectors, and pictures using the MM-410/AVM-510A.
•
Chapter 8: Audio (AVM-510A)— Explains how to add audio measurement to an AVM-510A
display.
•
Chapter 9: Automatic Measurement (AVM-510A)— Explains how to take specific kinds of
measurements on the most common types of test signals for the AVM-510A.
•
Chapter 10: Measurement Screens (Parameters and Limits) (AVM-510A)— Lists details about the
AVM-510A automeasurement screens.