Operator`s manual

10-1
10
10. Measurement Screens (Parameters
and Limits)
(AVM-510A)
Introduction
This chapter lists details about the AVM-510A Series Automated Video Monitors (AVM-510A) signal
processing capabilities automeasurement screens. The following tables are included:
•
Where Parameters are Measured  lists each parameter, shows which measurement set(s) a
parameter is found in, and whether a parameter is measured in NTSC, PAL, both NTSC and PAL,
EBU, and SMPTE.
•
Definitions of Automeasurement Parameters  lists all the parameters, giving their definitions
and the units in which each is measured.
•
Parameters: Range, Accuracy, and Limits  lists all the parameters with the range of
measurement possible, the accuracy (absolute and relative), and the minimum and maximum limit
settings.