Operating and Maintenance Manual

2.1.4 USER’S GUIDE FOR THE FIRST POWER UP

“MAGNISMARTECH ©MATTRESS” VERSION WITH VITAL SIGNS ACQUISITION SYSTEM AND CHROMOTHERAPY

1. Press the “A” button located in the lower part of the MagniSmartech ©Station. Press the button for approximatey

4 seconds or until the relevant status LED light lights up and turns green.

2. Wait 30 seconds for the system to start - the mobile phone holder should light up.

3. Press the “B” button located in the lower part of the MagniSmartech ©Station. Press the button for approximately 5

seconds or until the relevant status LED light lights up in light blue. Then, after switching it off, it will slowly ﬂash in an

amber (orange) color.

4. Download the “MagniSmartech” APP from the AppStore (soon available for Android).

5. Choose among the availbale wiﬁ networks on the mobile phone. Select the network that has an SSID with the item

“Smartech “, followed by an alphanumeric series.

6. Through the APP, follow the connection instructions to the system and LogIn with your registered user credentials.

For further details, consult the following website: www.magnismartech.com

7. If the user connects the “MagniSmartech ©Mattress” system to their own wiﬁ network, the “B” button’s reference

color to a slow ﬂashing green color, which indicates that the connection to the remote server is correct.

8. To reset the connection and take the system back to the access point mode, press the “B” button located in the

LED light lights up in light blue and then, after switching off, slowly ﬂashes in an amber (orange) color.

SNORING FUNCTIONS

1. Make sure that the LED light located on the transformer is lit, along with the green light, which can be seen under

2. Download the “MagniSmartech” APP from the AppStore (soon available for Android)

3. Through the APP, follow the connection instructions to the system and perform the LogIn with your registered

user credentials.