User's Manual

2
52
Fuel cut-out inertia switch
Fuel cut-out inertia switch
The vehicle is equipped with a safety switch which is designed to intervene in the event of a collision, cutting off the fuel supply and consequently causing the engine to stop. It also prevents fuel leakage if the fuel lines are damaged during the accident. The intervention of the safety switch is indicated by the warning light coming up on the instrument panel. The switch is positioned underneath the front left-hand seat.
After impact, if you smell fuel or note any leakage from the fuel supply system, do not
reactivate the switch to help prevent any risk of fire.
The activation of the inertia switch results in all the doors and the luggage compartment unlocking and in the internal dome lamp and the four direction indicators switching on.
Resetting the switch Turn the ignition key to the STOP
position. Check that there is no leakage from the fuel system. If no leaks are found, reset the inertia switch which stops the fuel pump operation, by pressing button A on the
switch. Turn the ignition key to the MAR
position, wait a few seconds and then move it to the ACC. position. Check that the warning light on the instrument panel is switched off. Check once again that there are no fuel leaks.
A