User's Manual

2
50
Parking sensors (optional)
WARNING: When cleaning the sensors, take special care not to scratch or damage them; therefore, do not use dry, rough or hard cloths. The sensors must be washed with clean water, possibly with car shampoo added. In car-washes which use steam jet or high pressure cleaning machines, keep the nozzle at least 4 in. (10 cm) away from the sensors.
Sensor range The sensors allow the system to monitor the front and rear of the vehicle. In fact, their position covers the central and lateral zones at the front and at the rear of the vehicle.
If the obstacle is located in the central area, this is detected at distances of less than 35 in. (0.9 m) (front) and 59 in. (1.50 m) (rear). If the obstacle is located in a lateral position, it will be detected at distances of less than 24 in (0.6 m).