User's Manual

2
30
Safe transport of children
Fitting the child seat in rearward-facing position To fit the child seat in a rearward- facing position, be particularly careful that the brackets C are properly
inserted in their seatings E. The baby is then secured by the child seat's harness F.
Fitting the child seat in frontward-facing position For installation, proceed as follows: – make sure that the release lever D is
in the standby position (retracted);
– align the anchoring points C with
the brackets E, then push the seat
until you hear it click into place, which indicates it is secured
– check for correct locking by trying to
move the child seat with strength; the safety mechanisms in fact, help prevent the child seat from being improperly fitted if only one of the attachment fittings is locked.
With this type of configuration, the child is also restrained by the vehicle seat belts and by the upper belt. In any case, see the instruction booklet provided with the child seat for fitting the vehicle belts into the seat correctly.
C
D
E
F
E
C
E
D