User's Manual

ManualsBrandsMagneti Marelli ManualsElectronicsVehicle Immobilizer

2

22

Seat belts

Seat belts

The vehicle is equipped with seat belts

with automatic retractor designed for

maximum freedom of movement.

The seat belts are provided with

electronically-operated pretensioners.

Moreover, the lower attachment

points are connected directly to the

seat to help provide maximum

protection.

Fastening the seat belts

Extract the lower section of the seat

belt from the outer side of the seat and

secure it by holding the fastening tang

A,

and pulling out the belt until the

tang inserts into the buckle lock

B

.

The belt is correctly engaged when the

lock clicks into position. To release the

belts, press button

C

.

If the driver’s belt is not fastened,

when the ignition key is turned to

MAR

the warning light

<

on the

instrument panel comes on and a

buzzer sounds for about 8 seconds.

The retractor locking device is

activated whenever the belt is pulled

out too rapidly or in case of sudden

braking or collision.

If the belt locks due to too rapid

extraction, allow it to retract a short

distance to disengage the locking

device.

The retractor allows the belt to

automatically ﬁt to the passenger’s

body, allowing free movement.

When the vehicle is parked on a steep

slope, the retractor may lock: this is

normal.

WARNING: Feed the belt back into the

retractor by hand to avoid twisting and

snagging.

A

C

B