User's Manual

Functions
The following functions can be assigned to a
mobile when registering.
Telephone and additional telephone
A mobile phone can be assigned the telephone
or supplementary telephone function.
Data transfer
A mobile phone assigned the telephone or sup‐
plementary telephone function may also be as‐
signed the data transmission function. For data
transmission, this can result in call charges, for
example, with a roaming connection.
A data transmission is displayed in the status
box, see Owner's Handbook for the vehicle.
The services breakdown assistance, hotline, tel‐
eservice call, automatic teleservice call, Internet
and BMW Live can be used via the mobile
phone. Using the services does not require a
valid ConnectedDrive contract.
The availability of the function depends on the
country and is series-specific. The mobile
phone must be compatible with and support the
required Bluetooth radio standards, equipped
with a corresponding mobile tariff and have suit‐
able Internet settings.
An existing data transmission can be terminated
immediately, for example, to avoid roaming
costs.
1.
Call up "Options".
2. "Transferring data via device"
The data transfer supplementary function is de‐
activated and can be assigned to another tele‐
phone.
Bluetooth audio
A mobile phone can be assigned the Bluetooth
Audio function. The mobile phone can then be
used as an audio source, see page 60.
Connecting/disconnecting
the mobile phone
Operating requirements
▷ Suitable mobile phone.
▷ Mobile phone operational.
▷ Ignition switched on.
▷ Bluetooth in the vehicle and mobile phone
activated.
▷ Bluetooth presettings must be made on the
mobile phone, for example connect without
confirmation or visibility; see Owner’s
Handbook of the device.
▷ If applicable deactivate Bluetooth audio.
▷ Any number with a minimum of 4 and a max‐
imum 16 positions is specified as the Blue‐
tooth passkey. Only required for non-recur‐
ring registration.
▷ Vehicle is at rest.
Activating/deactivating Bluetooth
connection
Bluetooth use is not permitted everywhere.
Comply with relevant local laws.
1.
"Settings"
2. "Connections"
3. "Bluetooth"
4. "Bluetooth"
Enabling/disabling functions
Activate functions before registering, to be able
to assign these to a mobile phone.
Information about suitable mobile phones that
support this function, see page 78.
1.
"Settings"
2. "Connections"
3. "Bluetooth"
4. Call up "Options".
5. "Configure Bluetooth"
Seite 79
Telephone Communication
79
Online Edition for Part no. 01 40 2 917 877 - II/13