Technical information

Enrange XLTX Intrinsically Safe
Transmitter Instruction Manual
April 2014
Page 19 of 24
WARNING
ONLY PERFORM SETTING CHANGES TO THE DIP SWITCH BLOCK THROUGH THE IR PORT IN A
NON-HAZARDOUS ENVIRONMENT OR “SAFE” ZONE. FAILURE TO FOLLOW THIS WARNING COULD
RESULT IN SERIOUS INJURY OR DEATH, AND DAMAGE TO EQUIPMENT.
The following figure details the dip switch positions for each RF channel.
Figure 8: Dip Switch Positions for RF Channel Selection
The dip switch settings will take effect upon the next power cycle of the transmitter.