Technical information

Enrange XLTX Intrinsically Safe
Transmitter Instruction Manual
April 2014
Page 13 of 24
Figure 3: Separated Alkaline Battery Pack
When reinserting the lid onto the outer housing, make sure that the lid aligns with the outer
housing and secure all four T10 star bit screws. When placing the battery pack into the XLTX
battery pocket, ensure that the pack is fully seated and that the thumb screw is tightened down to
hold the battery pack in place.
Figure 4: Installation of Battery Pack into XLTX transmitter
NOTE: The Intrinsically Safe battery pack must be secured in place with the thumb screw.
Failure to secure the thumb screw will not allow the battery pack to stay securely in place.