Manualshelf

Technical information

ManualsBrandsMagnetek ManualsRadioEnrange CAN-6
12345678910
Enrange CAN-2 Instruction Manual
January 2014
Page 8 of 33
3.0 CAN-2 RECEIVER INSTALLATION
WARNING
BEFORE OPERATING THE RECEIVER, FAMILIARIZE YOURSELF WITH ALL SAFETY INFORMATION IN
THIS MANUAL, APPROPRIATE MANUAL SUPPLEMENTS AND ANY OTHER LOCAL, STATE, OR
FEDERAL RULES OR REGULATIONS ALREADY IN EXISTENCE. FAILURE TO FOLLOW THIS
WARNING COULD RESULT IN SERIOUS INJURY OR DEATH AND DAMAGE TO EQUIPMENT.
3.1 PRE-INSTALLATION
1. The transmitter and receiver access code and channel must match before the system will
communicate.
2. Be aware of other radio channels in the surrounding area - set your system to a unique
channel.
3. Make sure that your equipment is working properly in manual mode prior to system
installation.
4. Make sure the power to the receiver is the correct DC voltage.
5. Disconnect equipment power prior to system installation.