Technical information

Enrange CAN-2 Instruction Manual
January 2014
Page 26 of 33
Reading the RCP Software Version
1. Select “Help.”
2. Select “About.”
3. RCP Software Version number will be displayed.
Resetting CAN-2 Back to Factory Default Settings
1. Select the “Reset to Defaults” button.
2. A dialog box will pop up confirming that you want to proceed. Click the button “OK” to
restore the factory default settings. On-screen prompts will confirm that the receiver has
been reset to defaults or if there are any issues.
3. Power cycle the CAN-2 receiver to implement the factory default values.