Installation guide

18 Specifications
5.1 – Mechanical Specification
MX2000-2
Size: 5.34” X 10.63” X 7.48”
135.6 mm X 270 mm X 190 mm
Weight: 8.25 lbs
3.75 Kg
MX2000-6
Size: 9.34” X 10.63” X 7.48”
237.3 mm X 270 mm X 190 mm
Weight: 11.0 lbs
5.0 Kg
MX2000-8
Size: 19.0” X 10.63” X 7.54”
482.6 mm X 270 mm X 191.6 mm
Weight: 12.0 lbs
5.45 Kg
5.2 – Environmental Specification
Operating Temperature: +32° F to +122° F
0° C to +50° C
Storage Temperature: -40° F to +167° F
-40° C to +75° C
Humidity: 95% max. non-condensing
Altitude: 10,000 feet maximum
3048 meters maximum
5.3 – Input Power
MX2000-2 or MX2000-2A
voltage: 90 to 265 VAC, 50/60 hz
current: < 0.5 Amps @ 115 VAc
fuse: 2 Amp (normal blow), 250VAC,
3AG type (2 required)
MX2000-6 or MX2000-6A
voltage: 90 to 265 VAC, 50/60 hz
current: < 0.5 Amps @ 115 VAc
fuse: 2 Amp (normal blow), 250VAC,
3AG type (2 required)
MX2000-8
voltage: 90 to 132 VAC, 50/60 hz
175 to 254 VAC, 50/60 hz
current: < 3 Amps @ 115 VAc
fuse: 3 Amp (slow blow), 250VAC
5.4 – MX2000 System
When ordering an MX2000 system a number of factors
must be taken into account. The number of axes, number
of I/O points and whether the I/O requires optical isola-
tion. The MX-2 and MX-6 power supplies have 24 expan-
sion I/O points that are not optically isolated but can be
interfaced to an OPTO-22 rack module. The MX-2A and
MX-6A power supply has 16 optically isolated inputs and
8 optically isolated outputs. The MX-8 power supply has
no I/O on it.
An Isolated 24 volt supply has been provided which has a
maximum current capability of 750 ma.
Another consideration for the I/O connections is the con-
nector style. The MX-2, MX-6 and any additional expan-
sion I/O cards have 50 pin mass termination connections
and are not optically isolated. The MX-2A, MX-6A and
any additional digital I/O card have plug-in screw termi-
nations and are optically isolated.
A System Block diagram with all the different combina-
tion to make up an MX2000 controller has been provided
on the next page.