Installation guide

106 Programming Commands
FOLSYNC Following Parameter
ACTION: Returns the following sync status of the specified axis.
PROGRAM SYNTAX: FOLSYNC(axis) - used in an expression
REMARKS: This command is defined in more detail in Section 8 Following.
FOLSYNCDIST Following Parameter
ACTION: Specifies a master distance to travel when a FOLOFFSET command is
issued. This distance will be traveled before execution of the
FOLOFFSET command .
PROGRAM SYNTAX: FOLSYNCDIST(axis)=expression
FOLSYNCDIST(axis)=expression1, ... , expression8
FOLSYNCDIST(axis) - used in an expression
FOLSYNCDIST(axis, ... ,axis)=expression, ... ,expression
REMARKS: This command is defined in more detail in Section 8 Following.
FOLTRIG Following Parameter
ACTION: Defines the follower starting trigger for motion.
PROGRAM SYNTAX: FOLTRIG(axis)=expression
FOLTRIG=expression1, ... , expression8
FOLTRIG(axis, ... ,axis)=expression, ... , expression
FOLTRIG(axis) - used in an expression
REMARKS: This command is defined in more detail in Section 8 Following.