Installation guide

104 Programming Commands
FOLMOVEREG Following Parameter
ACTION: Request a Following axis move registration cycle.
PROGRAM SYNTAX: FOLMOVEREG(axis)=expression
FOLMOVEREG=expression1 , ... , expression8
FOLMOVEREG(axis, ... , axis)=expression, ... , expression
REMARKS: This command is defined in more detail in Section 8 Following.
FOLOFFSET Following Parameter
ACTION: Defines a following incremental offset distance to advance or recede
from the master .
PROGRAM SYNTAX: FOLOFFSET(axis)=expression
FOLOFFSET=expression1, ... , expression8
REMARKS: This command is defined in more detail in Section 8 Following.
FOLOFFSETDIST Following Parameter
ACTION: Sets or returns the master distance traveled for a FOLOFFSET com-
mand.
PROGRAM SYNTAX: FOLOFFSETDIST(axis)=expression
FOLOFFSETDIST=expression1, ... , expression8
FOLOFFSETDIST(axis, ... , axis)=expression, ... , expression
FOLOFFSETDIST(axis) - used in an expression
REMARKS: This command is defined in more detail in Section 8 Following.