Owner's Manual DVD/VCR Combo MWR20V6
80 EN
xxxx
Others
Troubleshooting (cont’d)
• If you are still having trouble with this unit after checking Troubleshooting, write down the error code and the
error description, and call our helpline mentioned on the front page to locate an Authorized Service Center.
You can watch the TV programs
with the tuner of the unit. (Usually
channel 3 or 4 of the TV is
available for the RF converter
setting.) Be sure to connect the
unit to a TV using the RF cable.
Refer to page 14.
1
Select channel 3 on your TV.
2
Press [VIDEO/TV] on the remote
control.
• If noise appears, change the
RF output channel of the unit to
CH 4 by pressing [VIDEO/TV]
for 3 seconds. The RF output
channel will alternate between
CH3 and CH4 as follows.
• Each time the RF output
channel is changed, CH3 or
CH4 will appear on the front
panel display.
RF output switch
for more than
3 seconds
(
RF on
)
CH4
3 seconds
(
RF on
)
CH3
(
RF on
)
CH4
3 seconds
3 seconds
3 seconds
Error message Cause Solution
Recording Error
You cannot record more than
49 titles on one disc.
(The maximum is 49)
• You are trying to record onto
the disc on which the number of
recording titles comes up to the
maximum (99).
• Delete unnecessary titles (page 55).
Recording Error
You cannot record more than
254 chapters on one disc.
(The maximum is 254)
• You are trying to record onto the
VR mode DVD-RW disc on which
the number of recording chapters
comes up to the maximum (254).
• This unit cannot delete the original
chapter. Delete unnecessary
chapter mark using other DVD
recorders. Delete unnecessary
chapter marks (page 58).
Recording Error
You cannot record on this disc
as Control Information is full.
• This disc has no space to write the
Control Information when recording
or deleting contents.
•
When editing has been repeatedly
performed, the control Information
area may come up to be full even the
recording area has enough space.
• Delete unnecessary titles (page 55).
Recording Error
You cannot record on this disc
as Power Calibration Area is
full.
• When recordings are performed
repeatedly onto an unstable disc,
this area may come up to be full.
• Every time you insert a disc for
recording, the disc’s working area
will be taken up. And if you repeat
this frequently, it will be used up
sooner and you may not be able to
record full 99 titles.
• Insert a new disc.
Recording Error
This disc is already finalized.
• You are trying to record onto the
disc already finalized.
• Release the finalizing for this disc
(page 37).
Recording Error
The disc has a different menu
layout. (Set “Replace Disc
Menu” to ON to rewrite the
menu.)
• You are trying to record onto the
+VR formatting disc that had been
recorded by the other recorder.
•
Set “Replace Disc Menu” to “ON” to
rewrite the menu, after that you will
record to disc (page 27).
STANDBY-ON
OPEN/CLOSEVIDEO/TV VCR
.@/:
GHI
PQRS TUV WXYZ
JKL MNO
ABC DEF
DVD
DISPLAY
SETUP
OK
0
21
4
65
3
9
7
8
CHANNEL
TIMER
TIMER SET
SEARCH AUDIO DUBBING
SLOW
CM SKIP
RAPID PLAY
VCR REC DVD REC REC MODE
DISC MENU
RETURN
CLEAR/C-RESET TITLESPACE
E9A80UD_MWR20V6_02.indd 80 2006/01/17 17:58:38