Manual

_mr remote control can work your" TV and
ome VCRs, Cable Boxes, Satellite
Systems, DBS, DVD Player's, etc'. However, an
easy one-time step may be lwcessary before
the remote will work your" other" equipment.
Try this initial cheek to see rf you need to go
to the following section.
Place the TV/VCR/ACC Mode
Switch in the proper position (VCR or
ACC for other devices) for the device
you want to control.
Point the remote control at the device
and press the POWER button.
Does the remote turn the device ON?
If YES, stop and try other fonction
buttons on the remote. If they also
work the device, then the remote is
ready mid no further steps are needed.
If NO, continue...
First look up a THREE-DIGIT remote con-
trol number for your brand of device before
going through the simple steps on the follow-
ing page.
Find your three-digit code on pages 33-34.
\
VCR
\
Satellite Receiver
I I
Cable Converter
SLEEP
CD
A/CR STATUS/EXIT CC
VCR
-AGC
SMART
<_3
SOUND
@
®
Remember, if more than one code is listed for
your brand of device, you may have to try more
than the first three-digit code given in order to
locate your device's remote code.
NOTE: The remote is for use with external
accessory devices only and not for use with
other brands of TVs.
3O