Manual

|
After installing the batteries into
the remote, press the TV System
button to send remote commands
to the TV. Point the remote toward
the fi'ont of the TV (remote sensor
window) when pressing buttons.
V__.CR Buttons
For use of VCR buttons see the "Using
the Remote With a VCR".
Menu (VA) Buttons
Press the M button to show on-screen
featttre controls. Press • or • buttons
to move forward and backward
through the list of on-screen controls.
Oand (+) Button_
Press to adjust the selected on-screen
feature control.
Volume Button
Press to adjust the TV sound level.
Personal Preference Button
Press to return the TV to specific
picture and sound settings you have
placed in the TV's memory. Also can
be used as an Enter button when
send ing channel commands to remote
controlled cable converters or VCRs.
Smart Sound B0ttqn
Press to control TV sound levels. See
"Smart Sound/Auto Volume" section
for details.
Channel Guide Button
Press to show a list of labelled TV
charmels from which to select. See
"CH GUIDE" section for details.
PAUSE11
PiP
_t_tu_tExit Buttgn
Pre.,s to see the current channel
number on the TV screen. Also press
this button to clear the TV screen after
conlrol adjustments.
Alternate Channel Button
Pre.,s to select the previously viewed
channel.
IS'orexample: You are watching
channel 4 and change to channel 10
(usi ag the channel number buttons).
Pre.,s AJCH and you_rTV will return to
channel 4. Press A/CH again and your
"IN will return to channel 10.
Channel _;can Button
Pre.,s to scan up or down through
channel numbers.
Mute Button
Press to turn the sound OFF on the
"IN. Press again to return the sound to
its 1:revious level.
PII? Butt0n_
Pre,;s to operate Picture-In-Picture
fi:atares. See PIP section for details.
_N_u.mber Butt0n_;
Pre,;s the number buttons to select TV
chmmels. Press two number buttons to
select single digit channels. For
example: to select channel 6...press
"0" first and then "6".
T_-VCR-CBL System
B0tt0n_
l:_.,s to send remote control commands
to ether the TV, VCRs, or accessory
Ca'ele Converters. See the "How to
cpe:'ate VCRs and Cable Converters"
section for further details.
The remote's TV-VCR-CBL System
butttons control how certain buttons on the
remote are used.
For example:
With the "TV" System button pressed:
the MENU, (M)AY, and (+,-)
buttons are used to select and
adjust on-screen TV features.
With the "VCR" System button pressed:
the same buttons on the remote
work playback, search, pause,
and other VCR features.
i; .............. [ _,o,,.,_ I
38