Manual

_' Press MENU button to see TV
].4_)JUSTMENTS screen.
_' Press MENU • or • button to
move RED ARROW to c
PICTURE/SOUND controls.
_* Press MENU button to select
controls. ,,,
888
WU'_ Remember, the control [I_--_ C)
with the RED ARROW is
Iready to be used. Just press the
,I'ENU button to select it.
;The picture for the TV can come
.! through either the ANTENNA
plug or the A UDIO/VIDEO INput
jacks (on the rear of the TV). The
Picture Source control simply tells
the 73/which one of these picture
sources it is to show on the TV
screen.
_ Select PICTURE SOURCE
SELECT control.
'With the PICTURE/SOUND
CONTROLS on screen, move the
red arrow with the MENU ••
buttons. Then press MENU button.
_ Press the MENU •• buttons
_Ioplace the "f'v"in either:.
ANT/CABLE- for a picture signal
coming from the ANTENNA
plug on the TV.
VCR/AUX1- for a picture signal
coming from the AUX INI
Audio/Video jacks on the TV.
AUX2- for a picture signal
coming from the AUX IN2
Audio/Video jacks on the TV.
_> Press the STATUS button to
clear the screen.
PICTURE fSOUND CONTROLS
_EX_
I_ PICTURESOURCESELECT
BRIGHTNESS
-- PICTURE
COLOR
-- TINT
SHARPNESS
USE ".. THEN _ TO SELECT.
16
r
Remember. The VCR/AUXI (or
AWX2) TV screen will be blank
lunless a signal source connected to
is
Jthose Audio/Video Input:jacks on the
TV. (See page 34 for details).