OWNER'SMANUAL, \
MAGNAVOX Smart.Verysmart: Return your Warranty Regi_tra_-_c_._l_aday to ensure you receive all the benefits vou reen_lcled to. ..... Once your MAGNAVOX purchase is regis_red, product. So complete and return the Warranty advantage of these important benefits. Registering your product within 10 days confirms your right to maximum protection under the terms and conditions of your MAGNAVOX warranty. MA VOX - Dear MAGNAVOX -- "_ _marLvery smarL . .
[t_ Getting _ Started Warnin_Precautions Features How to Follow Antenna ................................ and Model Information your Easy-to-Use Owner's and Cable TV Connections VCR to TV Antenna First Time Set-Up Connections 2-3 Remotethe Remote Using (7ontrol (TV/VCR Operationbuttons)....38-39 ................. 4 Using Smai_ Sound or Auto-Volume Guide ..... 5 ...................... Using the Channel 6-7 ............................. Setting the Personal 7 and Use of the TV ........
First"rimeSetLipwhichautomatically setstheTV forlocalchannels and antenna mode. It even helps you As you unpack your TV please note that the following items have been included with your set: make the necessary connections for the Picture-InPicture (PIP) feature (see page 8.) Owner's Manual Warranty Registration Card Infrared Remote Control which operates your TV set and a variety of wireless remote control VCRs and Cable TV Converte,rs.
m- e style and design of this wner's Guide comes from you the customer. We've asked owners, such as yourself just what it is they would like to see to make our instructions more helpful and easier-to-follow. See below for the results of some of the simple and easy-to-use suggestions that you have given us. Feature explanations are kept clear, simple and in easy to understand terms. If you do -un into a word that's too technical, see the glossary in the back of the book.
l_irst let's connect your Antenna l or Cable TV signal to your TV. This will be easy since there is only one antenna plug (75_) on the back of your TV - and that's where the antenna goes. [-BEG--gffi-a'l _ If your antenna (or CABLE TV signal) has a round cable '75 ohm) with a metal prong (Fconnector) on the end, then you're ready to connect it to the "IV.
('_ ome of you may have two _ separate antennas. For blstance, one antenna is fi_r VHF channels (2-13).
irst Time Set Up makes the initial use of your TV easy and automatic. Just follow the steps below and let your TV set itself for local channels and the type of antenna signal you have. You can also set the TV's clock and make connections for the Picmre-lnPicture feature with First Time Set Up. [BEGIN) _ Press the MENU button on the "IV or the remote control. A TELEVISION TELEVISION ADJUSTMENTS USEl_)eTOSELECT ITEM.
The Testing and Searching for channels by the TV will last only a tEw minutes. The TV will even tell you when it is,finished and how many channels it has saved. "SAVED IN MEMORY" channels are the ones you select when you 'press the CHANNELAV buttons. _> * PLEASE WAft SYSTEMIS SEARCHINGFOR ALLACTIVECHANNELS. Press the MENU button to TESTINGCHANNEL2 IN ANTENNAMODE. continue to set the TV clock. _> " Press the MENU A_' buttons to set the time on the TV clock. i THESEARCH FORACTIVE CHANNELS IS COMPLETE.
r -<_ Connect the VIDEO OUT plug on the VCR to the AUX INI VIDEO IN plug (yellow) on the TV (see picture.) BACK OF "IV The TV will show you when the "CABLE HAS BEEN CONNECTED" to the right plug. Press MENU button to go on with PIP connections. <_> VIDEO OUT (YELLOW) Connect the AUDIO OUT plugs (Right and Left) on the VCR to the AUX INI AUDIO IN (red/white) plugs on the TV. ANTo_r CONNECT A CABLE FROM THE VCR 'VIDEO OUT' PLUG TO THE LOWER I_'E-CCO-W]PLUG MARKED "VCP,/AUXI' ON THETV REAR INPUT PANEL.
I -<_ The TV first tells you that for Surround Sound to work with the set you will need an additional pair of external speakers (8 ohm, ]5 watt minimum). Press the MENU button to go THIS "13/ISEQUIPPEDWITH A SURROUND-SOUND SYSTEM. on. <_ asks Then the you to read the Surround Sound section in the Owner's Guide (page 37) after you're finished with First Time Set Up. SURROUNDSOUNDREQUIRES THEUSEOFADDITIONAL SPEAKERS BEINGPLACED AROUNDYOURROOM.
Press the POWER button to turn the TV ON. (Note: you can press any button on tile front of the TV to turn the TV ON). _ The tuned channel number will appear brietty when the TV is first turned ON. You can also press the STATUS button to see what channel the TV is ON. _.P_ 6 Press the,,VOLUME UP (A) or I sound OWNlevel. (V) button to adjust the _ Press the CHANNEL UP (A) or DOWN (V) button to select TV channels.
o load the supplied Linto the remote: batteries Remove the battery compartment lid on the back of the remote. Place the supplied batteries (3-AA) in the remote. Be sure the (+) and (-) ends of the batteries line up correctly (inside of case is marked.) Reattach the battery lid.
eatures for your TV can be adjusted j_om a MENU screen shown on the TV. A MENU is nothing more than an on-screen list of features. Each MENU item can be adjusted by viewing the screen and pressing a button. TELEVISIONADJUSTMENTS USE '_)'TO SELECTITEM. 8 _> Press the :MENU button on the remote or TV. A list of TV PICTURE/SOUNDCONTROLS ADJUSTMENT controls appears on the TV screen.
TELEVISION ADJUSTMENTS USE_)aTO SELECT ITEM• ,m. ]_ PICTURE/SOUND CONTROLS -- ADVANCED CONTROLS -- FIRSTTIMESETUP -- EXIT • • pros:.; MENU to view Adju.'.amcnt Controls. pr,=_,;MENU A_' to move Red Arrow to desired • controls list. Pr_.s MENU to._lect highlighted controls list. PICTURE/SOUND CONTROLS -- EXIT ---- PICTURE SOURCE SELECT BRIGHTNESS PICTURE I_ --- COLOR TINT SHARPNESS ...... _:_:: : :::.:::::: ;: USE_. THENB TOSELECT. i:!i.... • pr0_. MENU .- tomo.
_' Press MENU button to see TV ] .4_)JUSTMENTS screen. _' Press MENU • or • button to move RED ARROW to PICTURE/SOUND controls. _* c Press MENU button to select controls. ,,, 888 WU'_ Remember, the control with the RED ARROW is [I_--_ C) I ready to be used. Just press the ,I'ENU button to select it. ;The picture for the TV can come .! through either the ANTENNA plug or the A UDIO/VIDEO INput jacks (on the rear of the TV).
_p adjust ),our TV color and icture controls, select a TV channel and follow the steps shown below: Select BRIGHTNESS, PICTURE, COLOR, TINT, or SHARPNESS picture control. With the PICTURE/SOUND CONTROLS on screen, move the red arrow with the MENU _kV PICTURE / SOUNDCONTROLS SOURCE SELECT ] -- PICTURE EXIT ml_ BRIGHTNESS _ PICTURE :: i COLOR TINT m SHARPNESS USE _ THEN_) TO SELECT. buttons. Then press MENU button. _> Press the (+) or (-) buttons to adjust the selected control.
learview is a sharpness which smoothes out feature background snow (or picture noise) without losing picture image detail PICTURE / SOUNDCONTROLS or crispness. [BEGIN] _ Select CLEARVIEW _1, CLEARVIEW ........ -- FLESHCORRECTION control. PIP COLOR PIPTINT BASS TREBLE With the PIC'TURE/SOUND CONTROL,'; on screen, move the red arrow with the MENU AY USE _ THEN_ TOSELECT. buttons. Then press MENU button. LL _ Press the MENU AY I1 I I I buttons mode.
e the Flesh Correction ontrol to keep skin tone hues (or facial tint)from varying from TV channel to TV channel. PICTURE/SOUNDCONTROLS (1_ Select FLESH CORRECTION control. With the PICTURE/SOUND CONTROLS on screen, move the red arrow with the MENU ,ty buttons. Then press MENU button. _2_ _ m CLEARVIEW I_ -- FLESHCORRECTION PIP COLOR BAss P,PT,NT TREBLE * USE _..THEN_ TO SELECT. Press the MENU AV buttons to turn the FLESH CORRECTION control ON. Press the STATUS button to clear the screen.
L..J ur TV also has individual ound adjustment controls. The BASS (low frequency), TREBLE(high frequency), and Speaker BALANCE may all be used to adjust the sound playback of TV programs. PICTURE/ SOUNDCONTROLS FLESHCORRECT1DN PIP COLOR m PIP TINT _ -- BASS TREBLE --- BALANCE EXPANDER USE _. THEN _ TO SELECT. Select BASS, or TREBLE, BALANCE sound control. " :: or With the PICTURE/SOUND CONTROLS on screen, move the red arrow with the MENU AY buttons.
PICTURE / SOUND CONTROLS ur TV is able to receive roadcast stereo TV programs. The TV is equipped with an -- amplifier and twin speaker system through which the stereo sound can be heard. A RED stereo light (on the front the TV) wil,! come on when a stereo broadcast is received. [ BEGIN <[_ -- BASS TREBLE BALANCE EXPANDER I_ STEREO/MONO --- : - SAP 2.,AuoPROGRAM: O -Extr of USE : THEN _ // TO SELECT. / ] Select STEREO sound control.
TELEVISION ADJUSTMENTS Press MENU button to _ ADJUSTMENTS see - _UR_S0U.DC0_0LS I screen. I_ _ I TV Press MENU • or • button -- ADVANCED CONTROLS FIRST TIME SETUP ] EXIT J ADVANCEDCONTROLS ADVANCED controls. to to move RED ARROW _'_ --EXIT I_ -- Press MENU button to select -- l the list of ADVANCED controls. -- ,_._-,_._ Remember, the control _1_ with the RED ARROW is PIPPICTURESOURCE CLOSEDCAPTIONING CAPT]ONINGDURINGMUTE SLEEPTIM ER SETTIME TIME REMINDER USE ._ THEN _) TO SELECT.
lOSed Captioning (CC ) allows ou ro read the voice content of television programs on the TV screen. Designed to help the hearing impaired this feature uses on-screen "text boxes" to show dialogue and conversations is in progress. NOTE: Not all TV programs and product commercials are made for broadcast with Closed Caption (CC) information included. Neittaer are all Closed Caption modes (SECOND LANGUAGE, FULL SCREEN 'I_.XT1, etc.
k_.J ve .you ever fallen asleep in ont of the TV and then have it wake you up at two in the morning with a test pattern screeching in your ears? Well, your TV can save you all that trouble by automatically turning itself off. [ BEGIN _1_ J Select SLEEP TIMER control.
th the TV Reminder controls N, the TV automatically shows you the current time and channel every thirty minutes. ADVANCED CONTROLS <_'_ Select TIME or CHANNEL REMINDER control. With the ADVANCED CONTROLS on screen, press the MENU A_' buttons to move the red arrow. Then press MENU button. _ m PIPPICTURE SOURCE CLOSED CAPTIONING CAPTIONING DURINGMUTE SLEEPTIMER i_ TIME SETTIME REMINDER -- CHANNELREMINDER USE _ THEN_)TO :: SELECT. Press the MENU AY buttons to turn the Reminder controls ON.
th the Channel/Time isplay control you can change the size and location of the on screen channel and clock information. ADVANCED CONTROLS CAPTIONINGDURING MUTE --SLEEPTIMER _ Select CHANNEI_/rlME DISPLAY SIZE control. m SETTIME -- TIME REMINDER CHANNELREMINDER With the ADVANCED CONTROLS; on screen, press the MENU AV buttons to move the I_ -- CHANi'I'IMEDISPLAYSIZE CABLECHANNELTUNING "USE _. THEN _) TO SELECT. red an'ow. Then press MENU button.
flRYOUdidn't go through the ST TIME SETUP (page 8), you need to make sure the TV is set to pick up either Cable TV or Antenna signals. In other words, the TV needs to know if you connected a Cable TV signal or a normal antenna to its ANTENNA plug. _ Select CABLE CHANNEL TUNING control. ADVANCEDCONTROLS -m SLEEPTIMER SETTIME TIMEREMINDER CHANNEL REMINDER CHAN[TIME DISPLAYSIZE CABLECHANNEL TUNING AUTO-PROGRAMMING USE _, THEN_ TOSELECT.
A uto-Programming is for adding ,U]klocal area channel numbers into the memory of the TV. This makes it easy for you to select only your area (or Cable TV) channels when the CHANNEL Ak • buttons are pressed. If you already TIME SETUP -m went through FIRST (page 8), this task has been completed Select AUTO control. CHAN/TIMEDISPLAYSIZE CABLECHANNEL TUNING AUTO-PROGRAMMING ADD/DELETE CHANNELS REDCONVERGENCE BLUECONVERGENCE "IVSPEAKERS ON/OFF for you.
A toProgramming (see previous page) adds all the channels it can find (on your Antenna or ,Cable TV system) into ADVANCED CONTROLS the TV's memory. Add/Delete Channels makes it easy for you to add other channels, or drop unwanted channels, from the list of channels in the TV's memory. _> -- CHAN/TIME DISPLAY SIZE CABLE CHANNEL TUNING AUTO-PROGRAMMING I_ ADD/DELETE CHANNELS --- Select ADD/DELETE CHANNELS control. USE.
! IT_7,_z-,.x, Remember. Convergence has I:een set at the factory for best viewing, but if one, or more of "_onvergence is the correct J lining up of the red and blue light paths on the TV screen. NOTE: lf no color fringing (see sidebar note) shows, then no Convergence adjustments are nccessary for your TV. objects (color fringing) follow the step:_ given in this I section. the (red or blue) colors appear around the edges of ADVANCED CONTROLS [-ffg-dr_ Select RED or BLUE CONVERGENCE control.
ould you like to hear TV € I€ prograrrL_ through your audio hi-fi system? The TV's Variable Audio Output jacks and TV Speaker On/Off control work together to offer you this TV sound BACK OF TV option. Connect the R(ight) and L(eft) VARIABLE MODE Audio Out jzcks on the TV to the R and L Audio Input jacks on your anaplifier or sound system. ADVANCEDCONTROLS Set the audio system's volume to normal listening level. <_ Turn the TV and audio system &N.
ensor Viewing allows parents block out, or "censor", any to channels they think children should ,not watch. A channel placed under Censor Viewing cannot be viewed until a correct access code is used to unlock the channel for viewing. •First let's set your Censor Code: ( BEGIN _> J Select the CHANGE CODE control. CENSOR ADVANCEDCONTROLS AUTO-PROGRAMMING AD_DELETECHANNELS REDCONVERGENCE BLUECONVERGENCE TVSPEAKERS ON/OFF CENSOR VIEWING .
k...d_ .#cer your personal Censor ode number has been set (see previous page), you are now ready to select the channels you want to censor or block out. ADVANCEDCONTROLS Fa-ggral ADD/DELETECHANNELS RED CONVERGENCE _> Select the CENSOR VIEWING control. BLUE CONVERGENCE -- With the ADVA.NCED CONTROLS on screen, press the MENU ,IkY buttons to move the I_ I TV SPEAKERSON]OFF CENSORVIEWING CHANGECENSOR CODE EXIT red arrow. Then press MENU button. "ENTER CURRENT shows on Ll'lescreen.
P_"_e TV's Audio/Video Input .[ jacks are Jbr ch'rect picture and sound connections between the TV and a VCR (or Video Disc Player, etc.) that has Audio/Video Output jacks. BACK OF TV 7"0view the playback of a VCR tape by using the Audio/Video Input jacks on the TV: _) Connect the VIDEO OUT jack VIDEO jacktoon TV. from theIN VCR thetheVCR/AUXI _> Contact y)ttr dealer or Parts ]nfommtion Center (I-800-292-6066) to ord(_ _:ay optional accessories.
["fieS(uper)- Video connection on . the rear of the :IV can give you better picture detail and clarity, for the playback of S-VHS VCR tapes or Video Discs, than the normal antenna Note: picture BACK OF TV connections. The VCR (or Video Disc PIayer) must have a S-VIDEO OUT(put) jack in order for you to complete the connections shown on t_ris page. Connect the S-VIDEO (S- I VHS) OUT jack from the VCR to _ke AUX IN 1 S-VIDEO jack on the TV.
- PT-_e Audio/Video Output jacks .£ on the TV can be used to record TV programs on VCRs which have AudiolVideo Input jacks. : i1 '! i .... To record TV programs by using the Audio/Video jacks on the TV: VIDEO OUT @, Connect the VIDEO OUT jack on the VCR. ffom the TV to the VIDEO IN jack @_ Connect the FIXED MODE AUDIO OUT jacks R(ight) and L(eft) from the TV to the AUDIO ![Njacks on the VCR. @_ Select the PICTURE :SOURCE control, on the TV.
y adding external speakers to 3 the TV's sound system, you can r c:eate the feeling of reflected sound that surrounds you at a movie theater or concert hall. Note: Surround Sound will not work with monaural audio material, or with only one speaker cormc¢led. BACK OF TV __ @. Connect both external speakers to the speaker wire terminals on the "IV. Recommended speakers: 8ohm, 15 watt minimum.
| _t_tu_tExit After installing the batteries into the remote, press the TV System button to send remote commands to the TV. Point the remote toward the fi'ont of the TV (remote sensor window) when pressing buttons. Alternate For use of VCR buttons see the "Using the Remote With a VCR". (VA) Buttons PAUSE11 Press the M button to show on-screen featttre controls. Press • or • buttons to move forward and backward through the list of on-screen controls.
_ ]'hen using the TV remote V ¥ with a VCR, firstmake certain it is set to control your VCR ( by the REMOTE CODE or SEARCH method - see following section). _, Press button _' Point the VCR System on the remote. Play Button Pres:; to playback a tape. Hold down after pressing the RECORD button to start a recording. the top of the remote (remote sensor window) when pressing buttons. l oward the front of the VCR Stop -"1 Button Pres:; to stop the tape.
tired of hearing blaring at you even when you've gone into the kitchen or down the hall? The ,Smart Sound (Auto Volume) ,control enables you to hear a more consistent, even sound level by reducing the peaks and valleys that can occur during program changes or commercial breaks. SMARTSOUND ON _> Press the Smart Sound button on the remote. "SMART SOUND" shows on the TV screen. _> Keep pressing the Smart I level Soundcontrol buttonON to (or turnOFF.
T'_o you ever have trouble .LJ remembering on which channel a particular station or network is located? The Channel Guide is a quick way to view and select channels from a list of Labelled channels. A Label is a/bur letter callout you ,can set to appear with the on screen channel number. Example ,Label: WXYZ - for a TV station's ,call letters. To select channels from the ,Channel Guide: _ Press the CH GUIDE _aheremote. Oil button A "CHANNEL GUIDE" shows on l_e screen with channel numbers :rod labels.
_o en Personal the remote Preference instantly button returns the TV to preset channel, picture, and sound level settings you place in the TV's memory. Five different Personal Preferences can be set so that more than one person can preset the TV for his (or her) preference. To set Personal Preference: :i :l ll_:_to CBEG-- q _> Press the Personal Preference (P.PREF.) button on the remote. "PERSONAL PREFERENCES" shows on the TV screen. _> Press the MENU button to own settings. EDIT or setup P. PREF.
To use the Personal Preference settings you placed in memory: Press the P. PREF the remote. button on "PERSONAL PREFERENCES" shows on the TV screen. @_ 8 Press the number button on the remote to select the P. PREF. you desire. For example: select "AUX IN". press 1 to The channel, picture and sound settings will change to the levels you setup for that P. PREF. 12:30 _]i_-._ Remember. If no settings _? have been made for the selected P. PREF., the TV screen will show "PREFERENCE NEVER SAVED".
our remote control is set to work your TV and many infrared remote (IR ) control VCRs. However, an easy onetime step may be necessary before the remote will work your VCR. Try this initial check to see if going on to the following section is necessary. [ BEGIN I _> VCR Press theVCR System button on the remote. _2_ Point remote toward VCR and press the POWER button. _,'_ Does the remote turn the VCR ON? IF YES, !_ and try the other VCR buttons on the remote.
w _Tow that-cou have looked up 1 "Nthe two-digit Remote Code Number for your brand of VCR (on previous ,page), you are ready to follow the four simple steps below. Please read through steps 1-4 before beginning. VCR _ PLAY• Press and release the REC (RECORD) button. Within thirty seconds after releasing the REC button, press and release the VCR System button. _, _ PAUS[It Within thirty seconds after releasing the VCR System button, ENTER THE TWO DIGIT CODE NUMBER for the desired VCR.
our remote control is set to work your TV and many infrared remote (IR ) control Cable Converters. However, an easy one-time step may be necessary before the remote work your Converter. will Try this initial check to see if going on to the following section is necessary. _ Cable Convene ! Press the CBL System I button on the remote. _> Point remote toward Cable Converter and press the POWER button.
]_ Towthat IN .you have looked up the two-digit Remote Code Number for your brand of Cable Converter (on previous page), you are ready to follow the four simple steps ,below. Please read through before beginning. steps 1-4 Press and release the REC _ (RECORD) button. Cable Converter i _ Within thirty seconds after releasing the REC button, press and release the CBL System button.
our remote be setisto work TV your VCR can by what called the SEARCH method. If the "REMOTE CODE" number method shown in the previous VCR section did not set your remote to work your VCR, then follow the five easy steps listed below. Please read t!hrough steps 1-5 before beginning. _> 09 Press the POWER button on I the VCR to turn VCR ON. _> Stand at least six feet away from the front of the VCR. Point the remote toward the VCR. HOLD DOWN the A/CH and VCR System buttons at the same time.
m .Vour TV remote can be set to &work your Cable Converter by what is called the SEARCH method. If the "REMOTE CODE" number method shown in the previous section did not set your remote to work your Converter, then follow :he five easy :rteps listed below. Cable Converter Please read t,_rough steps 1-5 before beginning. _> Press the POWER 09 button on Six Feet ,ON. ]the Converter to turn Converter Don't let the Converter up more _ Stand at least six feet away from the front of the Converter.
-- Dicture in Picture (PIP) is the 1showing of two pictures on the TV screen a_'the same time. (One main screen picture and one small inset picture - or PIP). // PIP Note: The PIP picture must be supplied by a VCR (or other accessory equipped with a VIDEO OUTPUT jack). If you already went througi_ FIRST TIME SETUP (page 10), then the connections for PIP have been completed.
N:h w that you have completed e requ_!red connections on the previous page you are ready to follow the simple steps shown below. _> Turn the VCR and TV ON. 12:00"" Place the VCR in the TV mode Use the TV/VCR button on the TV remote (if the remote has been set to work with your VCR - see page 44.
_U remote the PIP picture can be moved and swapped with the main screen. _£_y using the PIP buttons on the I 4. FREEZE .,._' > Press PIP ON button to show the PIP picture. PIP screen appears in comer of TV ,screen. Press PIP ON again to remove PIP from the main screen. ,,,_> Press PIP POSITION button on the remote to move the PIP ]picture (from comer to comer on tubemain screen). _> Press SWAP to swap the main screen picture with the PIP picture.
5. PIP SIZE Press SIZE button to change the si:;:eof the PIP window shown on _:h_,. TV screen. 6. PIP STROBE Press the PIP SIZE button again to see ard compare the large and small size PIP windows. <_ Press STROBE to see a sel'ies of tbur frozen scene.,; from the currently selected channel. Press STRt!; again and the series of pictures will be updated. _ Press PREVIEW button to see what is showing on four channels. P/VUE starts with the current chanrel and shows fl_e next three chanr_els in memory.
rl_c e picture for the PIP window an come through either the ANT/CABLE, VCR/AUXI or AUX IN2 Inputs (on the rear of the TV). PIP Picture Source simply tells the TV which one of these three sources it is to show in the PIP. ADVANCEDCONTROLS -- EXIT I_ PIP PICTURESOURCE -- CLOSED CAPTIONING [-aggral -- CAPTIONINGDURING MUTE _-_ Select PIP PICTURE SOURCE control. -- SLEEPTIMER With the ADVANCED CONTROLS on screen, move the red arrow with the MENU A!r -- SETTIME -- TIME REMINDER USE _.
P_'_e Picture-In-Picture (PIP) .i_ Color and Tint controls are used to adjust the color settings for PIP when it is shown on the 73/ screen. PICTURE / SOUNDCONTROLS _, --I_ Select PIP ,COLOR (or TINT) c ontroI. With the PICTURE/SOUND CONTROLS on screen, move the red arrow with the MENU _kY CLEARVIEW FLESHCORRECTION PIPCOLOR PIPTINT BASS TREBLE BALANCE I,I_;E _ THEN I_ TO SELECT. buttons. Then press MENU button. _ The PIP automatically comes on to show the PIP window on the "]TVscreen.
m. iP hookup with Cable Converter Box and VCR.
Dlease make these simple . checks before callingfor service. These tips can save you time and money since charges for TV installation and adjustment of c:_stomer controls are not covered CAUTION: A video source (such as a video game, Compact Disc Interactive - CDI, or TV information channel) which shows a constant non-moving pattern on the TV screen, can cause picture tube damage. When your TV is continuou_Jy used with such a source the pattern of the non-moving portion of the game (CDI, e::c.
Coaxial Cable * A single solid antenna wire normally with a metal plug (F-type) end connector that screws directly onto a 75 Ohm input found on the Television Display * An on screen message operate and adjust his Television S:reen Displays (OSD). Direct Audio/Video Inputs matched Picture -In-.Picture (PIP) * Term used when two pictures are shown on the TV screen at tt:e same time. The smaller PIP (or pushes) or VCR. picture is supplied by a VCR (or other tuner/video playback source).
Accessories!Optional Add!Delete Advance .............................. 6, 7, 31,34, Channe.ls .................................................... 8, 28, 29 Buttons ..................................................................... Audio Controls Audio/Video Automatic 12 ............................................................. Auto Volume Control Battery Installation Cable TV Connections/Settings .................................. 14 (PIP) .............................................
PROJECTION TELEVISION One (1) Year In Home Service Labor Warranty Thirty (30) Day Exchange Warranty Projection TV Screen One (1) Year Exchange Warranty Parts Two (2) Year Exchange Warranty on Cathode Ray Tube For purchases outside the U.S., see applicable warranty from country of tmrchase. gives you specific legal rights and you may also have other rights which vary from state to state.
