Technical data

Part Number Source of Supply
Intex 857 EZE Products Inc, Intex Chemical
Div
Cage Code: 8Z357
603 High Tech CT
Greer, SC 29650
CeeBee A-292 CeeBee Div.; McGean-Rocho, Inc.
Cage Code 8U841
1314 Murphy Ave.
Atlanta, GA 30310-4004
2.6.3 Remover For Polysulfide Primer With A Poly-
urethane Topcoat. There are no USAF approved specifi-
cation removers for this finish system, but proprietary remov-
ers of two different types, phenolic and non-phenolic/non-
cresylic, have been tested and approved by the Air Force
Corrosion Prevention and Control Office for use on USAF
aircraft, missile, and equipment metal surfaces. While they
will remove military specification polyurethane topcoats, it is
much more efficient to remove polyurethane topcoats with
one of the removers listed for epoxy and polyurethane finish
systems first and then to remove the polysulfide primer with
one of the removers listed in this paragraph. This method is
highly recommended to avoid excessive use of materials,
man-hours, and flow time in removal of this finish system.
These removers are heavy bodied or very viscous liquids
designed to remove polysulfide primer with a polyurethane
topcoat by solvent action; preferably after the polyurethane
topcoat has been removed with one of the removers listed for
epoxy and polyurethane finish systems. These removers shall
be applied full strength, with no dilution, in a smooth even
coat by either a brush or a non-atomizing type sprayer. The
removers authorized to remove polysulfide primer with a
polyurethane top-coat from USAF aircraft, missiles, and
equipment metal surfaces are identified below by PN and
source of supply, 8010-01-270-3637 (55 GL DR).
The maximum shelf life of PN B&B 5151A
Remover is three months. This remover shall
not be used if it is older than three months
from the date of manufacture.
Part Number Source of Supply
B&B 5151A &
9500
B&B Tritech, Inc.
Cage Code: 21316
875 W 20
th
St
Hialeah, FL 33010-2310
CeeBee R-458 CeeBee Div., McGean-Rocho, Inc.
Cage Code: 8U841
1314 Murphy Ave.
Atlanta, GA 30310-4004
2.6.4 Removers For Environmental Compliance. In
addition to removers listed in preceding paragraphs, removers
based on benzyl alcohol and alternate alkaline materials have
been tested and approved for use on USAF aircraft, missile,
or equipment metal surfaces by the Air Force Corrosion
Prevention and Control Office. These products offer the
advantage of reduced hazardous waste generation and contain
ingredients not currently listed as hazardous materials for
occupational health or environmental contamination. How-
ever, skin and eye protection is still required. Consult the
local bioenvironmental engineer for minimum personal pro-
tection requirements and the local environmental coordinator
to establish proper handling and disposal procedures for the
removers and the process waste. These products have flash
points ranging from 150° F to over 200° F so they are not
classified as flammable materials, but as combustible mate-
rials. Their use should be coordinated with the local fire
department. These products do not afford the same production
rates as the traditional methylene chloride and phenolic type
removers, and removal efficiency on each type of coating
varies for each product. They are chemically unique and not
necessarily interchangeable for a particular task. The products
are generally effective for topcoat removal but have differing
degrees of effectiveness with primers. The following remov-
ers are authorized to remove organic finishes from USAF
aircraft, missiles and equipment metal surfaces:
2.6.4.1 Removers for epoxy/polyurethane primer and
polyurethane topcoats 6850-01-495-0236 (55 GL DR), 6850-
01-495-0135 (5 GL), 6850-01-495-0148 (1 GL), 6850-01-
523-0007 (8 oz).
Part Number Source of Supply
CeeBee E-1092A,
E-2000,
E-2002A &
E-2012
CeeBee Div, McGean-Rohco Inc.
Cage Code: 8U841
1314 Murphy Ave.
Atlanta, GA 30310-4004
PR-3131/PR-3133 Eldorado Solutions, Inc.
Cage Code: 55208
11611 N Meridian ST, STE 600
Carmel, IN 46032
DBA of Eldorado Chemical CO Inc.
6813, 6813E, &
6840S
Turco Products Inc. Henkel Surface
Tech
Cage Code: 1N6B3
32100 Stephenson HWY
Madison Heights, MI 48701
B&B 9400 & 9575 B&B Tritech, Inc.
Cage Code: 21361
875 W 20
th
St
Hialeah, FL 33010-2310
TO 1-1-8
2-6 Change 3