user manual

11EN 11EN
Recording Playback Editing
Introduction
Connections Basic Setup Function Setup VCR Functions
Others Español
DVD
DIGITAL
AUDIO OUT
AUDIO
OUT
S-VIDEO
OUT IN
COAXIAL
L
R
L
Y
P
B
/CB
PR
/CR
R
L
R
S-VIDEO I N --- AUDIO --- OUT
IN --- VIDEO --- OUT
COMPONENT
VIDEO OUT
DVD/VCR
HDMI OUT
OUT
IN
ANTENNA
1 2
591113 10 8 6712
3
4
Rear Panel
FUNCTIONAL OVERVIEW
Note
• Do not touch the inner pins of the jacks on the rear
panel. Electrostatic discharge may cause permanent
damage to the unit.
• This unit does not have the RF modulator.
1. AC Power Cord (DVD/VCR)
Connect to a standard AC outlet to supply power to this
unit.
2. HDMI OUT jack (DVD only)
Use an HDMI cable to connect to a display with an
HDMI compatible port.
3. ANTENNA OUT jack (DVD/VCR)
Use to connect an RF coaxial cable to pass the signal
from the ANTENNA IN to your TV monitor.
4. ANTENNA IN jack (DVD/VCR)
Use to connect an antenna.
5. AUDIO OUT jacks (DVD/VCR)
Use to connect a TV monitor, AV receiver or other
device with an RCA audio cable.
6. VIDEO OUT jack (DVD/VCR)
Use to connect a TV monitor, AV receiver or other
device with an RCA video cable.
7. VIDEO IN jack (L1) (DVD/VCR)
Use to connect external device with an RCA video
cable.
8. AUDIO IN jacks (L1) (DVD/VCR)
Use to connect external device with an RCA audio
cable.
9. S-VIDEO IN jack (L1) (DVD/VCR)
Use to connect the S-video output of external device
with an S-video cable.
10. COMPONENT VIDEO OUT jacks (DVD only)
Use to connect a TV monitor with component video
inputs with a component video cable.
11. S-VIDEO OUT jack (DVD only)
Use to connect the S-video input of a TV monitor, AV
receiver or other device with an S-video cable.
12. AUDIO OUT jacks (DVD only)
Use to connect a TV monitor, AV receiver or other
device with an RCA audio cable.
13. COAXIAL DIGITAL AUDIO OUT jack (DVD only)
Use to connect an AV receiver, Dolby Digital decoder
or other device with a digital audio coaxial input jack
with a digital audio coaxial cable.
E9M81UD_ZV457MG9.indd 11 2008/05/15 14:30:40