DVD VCR Combo User Manual

94EN94EN
VCR FUNCTIONS
One-touch Timer Recording (OTR) Index Search
This feature allows you to set the recording length simply
by pressing [REC I] on the remote control.
Press [VCR] first.
1) Insert a recordable tape with an erase-protection
tab intact.
2) Select the recording mode using [REC MODE].
(Refer to “Recording” on page 93.)
3) Select stereo or SAP. Refer to page 34.
4) Select the desired channel to record using
[CHANNEL
/ ] or [the Number buttons].
5) Press [REC I] to begin the one-touch timer
recording.
You can select a fixed recording time by pressing
[REC I] repeatedly.
(0:30) (1:00)
(Normal recording)
(7:30)(8:00)
When the one-touch timer recording is finished, the
unit will turn off automatically.
To change the recording length during the one-
touch timer recording:
Press [REC I] repeatedly until the desired length
appear.
To cancel the one-touch timer recording within the
specified time:
Press [STOP C].
Note
• The remaining recording time will be displayed on
the front panel display during one-touch timer
recording. Press [DISPLAY] to see it on the TV screen.
• You cannot pause the one-touch timer recording.
• If VCR one-touch timer recording is completed
during DVD playback or recording, the VCR will be in
stop mode and the DVD keeps the current mode.
• Unlike a timer recording, you can perform the
following operations during the one-touch timer
recording.
- Turning off the power to stop one-touch timer
recording.
- Using [REC I] or [STOP C] on the remote control.
• When the one-touch timer recording is finished and
the power is turned off, the unit will switch to the
timer standby mode automatically if a timer
recording has been programmed. Press [TIMER SET]
to cancel the timer standby mode for using the unit
continuously.
An index mark will be assigned at the beginning of each
recording you make. You may skip to a specific marked
point by following the steps below.
Press [VCR] first.
1) Press [SEARCH] so that “INDEX SEARCH” menu
appears.
2) Using [the Number buttons], enter the number of
recordings you wish to skip within 30 seconds.
INDEX SEARCH
03
3) Press [E], [D] to start index search.
If you want to go in the forward direction, press [D].
If you want to go in the reverse direction, press [E].
After index search, the VCR will play back the cassette
tape automatically.
Pro.1 Pro.2 Pro.3 Pro.4 Pro.5
02 01 01 02 03
Beginning
of tape
End
of tape
CURRENT PROGRAM
INDEX MARK
Note
• You can make the index mark up to 20.
E9M81UD_ZV457MG9.indd 94 2008/05/15 14:32:10