User manual

,s°1
HDMI "11"
®
HDH| I
AV1
HDMI
DVI
AVh
Analog Audio out
75 fl
HDMI =_t=
@
0
HDMI (High Definition Multimedia Interface)
connectors
HDHI is the leading new standard for Digital video and audio
interconnection. With the HDMI connector you can connect
HDHI Set-Top Box compatible DVD-R or DVD player with HDMI,
or DVl-equipped devices like a computer or other HDMI devices
to your TV. With this connection, you can display high-definition
pictures on this TV in digital format.
Note: If the accessory device has DVI output only, use a DVI to
HDHI adapter cable to connect to the HDMI connector
Connect your HDMI device with HDHI connector.
Select the connected digital device in the Setup, Source menu, p. 18
The HDHI IN connectors allow
- the following TV and monitor display modes:
SDTV 6401720 x 480i
EDTV 6401720 x 480p
HDTV 1920 xi080ii1280 x 720p
Notes:
- If necessary, you can adjust the picture position to the center of the
screen with the cursor keys.
- Due to legal requirements, it is possible that audio may be muted when
playing certain copy protected PGM audio #ror,na device connected to
the HDM! input.
- Your TV supports HDCP (Highbandwidth Digital Content Protection).
This is a system for protecting DVD content outputted via DV! from
being copied. It provides a secure digital link between a video source
(DVD, PC,etc.) and your TV. Content is encrypted at the source device to
prevent unauthorized copies from being made.
- Proper working is only guaranteed with HDMI compliant consumer
- Digital devices _rorn different manu_cturers may di_rering output stan
dards, which may prevent your television from properly displaying
- If your TV does not detect a signal from your HDM! device, turn oft
and then turn on the HDMI device. For optimal viewing, we suggest you
adjust your DVD player to one of the fbllowing TV display standards:
1920xlO80i,1280x720p,720x480i or 720x480p.
Side connections
Camera, Camcorder, Game
O Connect your camera, camcorder or game as shown.
Connect to VIDEO (_) and AUDIO L (_) for mono equipment.
For stereo equipment also connect AUDIO R O. S-VHS quality
with an S-VHS camcorder is obtained by connecting the S-VHS
cables with the S-VIDEO input (i) and AUDIO inputs Q.
Do not connect cable (_) and (_) at the same time. This may
cause picture distortion !
Headphone
O insert the plug into the headphone socket ,_,as shown.
O Press the MUTE button on the remote control to switch off
the internal loudspeakers of the TV. The headphone impedance
must be between 8 and 4000 Ohm. The headphone socket has a
3.5 mm jack.
In the Sound menu select Headphone volume to adjust the head-
phone volume.
32