User manual

ANTENNA
_W
® _ ...... ® .........
_0
RECORDER
Recorder and other A/V devices
O Connect the RF antenna cable (_) of the RF IN socket of your
other AV device.
Connect the RF output of the AV device to the RF input of the
recorder Q.
_]_ Connect another RF cable 0 from the output OUT of your
recorder to the TV's input CABLE/ANTENNA 75 _ "_r jack.
O To obtain better quality, also connect the Video or S-Video,
Audio left and Audio right cables of both devices to AVl
(VIDEO or AUDIO L and R,) O and to AV2 (VIDEO or
AUDIO L and R) O.
Notes:
- When you use mono equipment, only the left loudspeaker
reproduces sound. Use a rnono-toostereo adapter (not supplied) for
sound reproduction through all internal loudspeakers.
- When using the g-VIDEO connector do not connect any device to
the AV3 VIDEO input.
ANTENNA
{_ AV2:L ÷ R + VIDEO
7s_
wO
Recorder and cable box with RF output
Use an signal splitter (not supplied).
Connect one of the cable TV signal splitter (not supplied)
outputs O to the cable box's IN jack.
O Connect the other cable TV signal splitter output (D to the
CABLE/ANTENNA 75 _ _ plug on the bottom of the TV.
O Connect the cable box's OUT jack (_) to the recorders RF IN
socket.
O Connect the Video, Audio Left and Right (only for stereo
sound) recorder AV cables O to the VIDEO, audio L and R
input AV2 jacks on the TV.
STB RECORDER
]®®
AV2 AVI
CABLE
L ÷ R ÷ VIDI='O
I
STB
Satellite Receiver / cable box with AV outputs
O Connect the satellite antenna cable or the Cable TV cable (_) to
the satellite receiver's or cable box's IN jack.
4[_ Connect the Video, Audio left and right AV cables O to the
VIDEO, L and R audio input jacks of AV3.
If}our satellite receiver or cable box has an S-Video jack:
For improved picture quality, connect an S-Video cable to the
S-VIDEO input instead of connecting the satellite receiver or
cable box to the VIDEO jack.
Connect the audio cables to the device's AUDIO L and R jacks
and to the L and R audio AV3 jacks on the TV.
29