User guide

137
AirMatic controller is the key to
maintaining consistent droplet size
The AirMatic controller regulates air flow to the AirJet nozzles.
It senses changes in the liquid pressure and adjusts air flow
accordingly. This enables the system to maintain a consistent
droplet size when ground speed and/or application rate changes.
With the AirMatic controller, regulating droplet size is virtually
foolproof. The system gives information needed to manage
changing conditions.
n
Five droplet size settings. Choose among very fine, fine,
medium, coarse or very coarse droplets. As conditions vary,
droplet size can be instantly switched without leaving the
sprayer cab or changing spray tips.
n
Alarm mode. When the system detects a variation in liquid
pressure beyond the set pressure-to-air relationship, a flashing
message on the display alerts the operator to “Drive Slower” or
“Drive Faster.” Likewise, an “Increase RPM” message will flash if
the air compressor is working too slowly.
n
Wind measurement. An optional anemometer measures wind
strength and advises the operator when it’s too windy to spray.
n
RPM measurement. An optional RPM input measures
air compressor speed for on-the-go monitoring of
compressor performance.
n
Full compatibility. The AirMatic controller can be used in
combination with any TeeJet flow-based electronic controller.
*Not available in all countries.
System Checklist
PART
NUMBER
DESCRIPTION
65-50004 Console Mounting Bracket (2 Required)
75-50006 844-E-5 Console
75-30008 AirMatic Console
45-05409 AirMatic Main Cable
51-20010 Wind Speed Sensor
45-20240
Main Cable Extension, 139 (4 m)
45-20055
Main Cable, 169 (5 m)
45-20006 Battery Side Power Cable
45-20061
Spray Side Power Cable, 339 (10 m)
78-10002 Junction Box
90-02177
801 Flow Meter with 19 Hose Barbs
16-40015
Proximity Wheel Speed Sensor, 139 (4 m)
45-20047
Pressure Sensor Cable, 209 (6 m) (2 required)
16-40005 Pressure Sensor, 150 PSI/10 bar
16-00011 Pressure Sensor, 36 PSI/2.5 bar
57-10050
Flow Meter to Junction Box Cable, 139 (4 m)
344BRL-2FS-03C60IC Liquid Regulating Valve
455BEC-2F-C60IU Liquid Boom Section Manifold
495BEC-C60IU Air Boom Section Manifold
346BRB-2F-03C60IC Air Regulating Valve
491BEC-C60IU Air Relief Valve
49880A-#-NYB AirJet Nozzles (1 for Each Nozzle Position on Sprayer)
Note: Air Compressor not available through TeeJet.
System Diagram
Air
Compressor
Air Regulating Valve Liquid Regulating Valve
Pump
Liquid from Tank
Flow Meter
To Tank
Master Input
AirJet Nozzles
Wheel Speed
AirMatic® AirJet® Sprayer Control*
MOBILE ELECTRONICS
ENGLISH
Interchangeable cores
are inserted in the AirJet
nozzle to control liquid
flow rates.
Liquid
Pressure
Air
Pressure