Owner`s manual

18
Before you begin:
You must set [Home] in [Location]. ,,B p.24
Otherwise. the settings you adjusted win not be memorized
after the unit goes nto standby mode.
1 Use i/V to select the _temyou want to adjus_L,then press
OK.
2 Adjustthe foNowing items.
Smart Picture
Use lit to select the des red sett ng, then press OK.
([Personal], [Standard], [Sports], [Movie], and [Game])
Brightness, Contrast, Color, Tint, Sharpness,
Color Temperature
You can only adjust the following opt ons when you set to
[Personal] in [Smart Picture],
Use i/• to select the des red sett ng, then press OK. fhen
use _1/1_ to adjust the sett ng.
Cursor _1 Cursor •
Brightness to decredse brightness to ncredse brightness
Contrast to decrease contrast to ncrease contrast
to deooase coot to noease coot
Color
ir_tensity nterlsty
Tint to add red to add green
Sharpness to soften to shal-pen
Color to add warm colors to add coo colors
Temperature
_und
Before you begin:
You must set [Home] in [Location]. ,,,Bp.24
Otherwise, the settings you adjusted win not be memorized
after the unit goes nto standby mode.
1 Use i/T to select the _temyou want to adjus_L,then press
OK.
2 Adjustthe following terns.
Smart Sound
Use i/• to select the desired setting, then press OK.
([Personal], [Standard], [Movie], [Music], and [News])
Equalizer
Adjust tonal quality for each frequent 7.
Use _1/1_ to select the specific frequency and use i/• to
adjust the level,then press OK.
Auto Votume Leveling
Ths function keeps a constant loudness d fferential between
the iV commerc als and the programs.
Use i/• to select the desired opt on, then press OK.
TV Speakers
Select the audio output from the unit's speal<ers, or not. If your
amplifier s HDMI link funct on compat hie and connected by
an HDMI cable to this unt, some sound operations such as
volume up can be changed by usng ths unit's remote control.
Make sure [fun-Link Control] is set to [On]. iiiil p.23
Use i/• to select the desired opt on, then press OK.
On The sound will be output fl_m the unt's speakers.
Off [he sound will not be output fi-om the unit's
speakers.
You can contro audo output fix_m your
Ext. Amp connected HDPII nk devices by usir_gthis unt's
remote contro.
b_oe
We do not guarantee 100% interoperab ty wth other brands of
HDPll nk complant devices.
Primary MTS
You can set the output mode as a default for the sound mode
(NISC only),
Ths sett ng s not interlocked when you change the output
mode by press ng SAP/AUDIO. [Sound Functions] ,,! p.15
Use i/• to select the desired opt on, then press OK.
Stereo Outputs stereo aud o.
Mono Outputs mono aud o.
SAP Outputs second aud o program.