Service manual
Table Of Contents
- SAFETY INFORMATION
- CONTENTS
- 1. SPECIFICATIONS
- 2. EXPLODED VIEWS AND PARTS LIST
- 2.1 PACKING
- 2.2 EXTERIOR
- 2.3 CD MECHANISM MODULE
- 3. BLOCK DIAGRAM AND SCHEMATIC DIAGRAM
- 3.1 BLOCK DIAGRAM
- 3.2 OVERALL CONNECTION DIAGRAM(GUIDE PAGE)
- 3.3 KEYBOARD UNIT
- 3.4 CD MECHANISM MODULE(GUIDE PAGE)
- 4. PCB CONNECTION DIAGRAM
- 4.1 TUNER AMP UNIT
- 4.2 KEYBOARD UNIT
- 4.3 PANEL UNIT
- 4.4 CD CORE UNIT(S10.5COMP2)
- 5. ELECTRICAL PARTS LIST
- 6. ADJUSTMENT
- 6.1 CD ADJUSTMENT
- 6.2 CHECKING THE GRATING AFTER CHANGING THE PICKUP UNIT
- 6.3 ERROR MODE
- 6.4 IPOD TEST MODE
- 6.5 SYSTEM MICROCOMPUTER TEST PROGRAM
- 7. GENERAL INFORMATION
- 7.1 DIAGNOSIS
- 7.1.1 DISASSEMBLY
- 7.1.2 CONNECTOR FUNCTION DESCRIPTION
- 7.2 IC
- 7.3 OPERATIONAL FLOW CHART
- 8. OPERATIONS
DEH-P6950IB/XN/ES
49
5678
56
7
8
C
D
F
A
B
E
6.4 IPOD TEST MODE
[Built-in iPod Test Mode Specification (Test mode for service representatives)]
[Purpose of this test mode]
This is a specialized mode that aims to check malfunction condition of H/U and measure the product performance.
[Features of this test mode]
Enables switching at any time to the iPod source
Disables communication with iPod
Disables indication of logos (Pioneer) on iPod
Functions regardless of connection of the iPod body to H/U
[How to shift to test mode]
The following describes how to enter and display the test mode.
1 Disconnect the iPod body from H/U.
↓ [Background]
↓ If you try to start the test mode without disconnecting iPod, initial communication will start between iPod
↓ and H/U before you can enter the test mode. This will disable the iPod operation from the iPod body.
↓ To enable the iPod operation during the test mode from the iPod body, make sure to disconnect
↓ the iPod body from H/U.
↓
2 Press [LIST] and [CLOCK] together to reset and start the test mode.
↓
3 Press such as the [SOURCE] key to switch to the iPod source.
↓
4 Connect the iPod body to H/U as need.
[Cancellation of test mode]
The test mode is cancelled by executing any of the following.
ACC_OFF
∗
This applies to the case that the test mode is set to be cancelled with ACC_OFF.
B. Up_OFF
Pressing the H/U reset button
[Operational specifications for test mode]
The following specifies the key allocation and the actions.
[On-screen image]
The following are the on-screen display images.
The following are displayed as title information.
Default
OFF
Remarks
Switches ON/OFF the charging circuit to iPod.
Key
→
Action
ON/OFF state of charging circuit (1: ON, 0: OFF)