Digital Video Disc Recorder & Video Cassette Recorder User Manual

42 EN42 EN
BASIC RECORDING & ONE-TOUCH TIMER RECORDING
5
Press [STOP C] to stop recording.
The recorded title will appear in the title list.
(Refer to “Guide to a Title List” on page 70.)
e.g.) DVD+R
Writing to Disc
Please finalize the disc when the writing is
completed before playing back on other DVD
players.
90%
1 SP(2Hr)
2
EMPTY TITLE
1:41:17
SP(2Hr)
NOV/21/09 11:00
AM
CH12 SP
NOV/21/09 0:20:44
• Press [STOP C] to exit the title list.
4
Press [REC] to start recording.
I” will be displayed for 4 seconds.
I
SP(2Hr) 2h00m
Press [PAUSE F] to pause recording.
Press [PAUSE F]] or [REC] again to restart
recording.
To set one-touch timer recording (OTR)...
This is a simple way to set the recording time in blocks
of 30 minutes.
Press [REC] repeatedly until the desired recording time
(30 minutes to 6 hours) appears on the TV screen.
One-touch timer recording will start.
0h30m
(normal recording)
6h00m
5h30m
1h00m
I
0h30m
To change the recording length during the
one-touch timer recording:
Press [REC] repeatedly until the desired length appear.
To cancel the one-touch timer recording within the
specified time:
Press [STOP C].
Note
When you press [REC], recording starts immediately and continues until the disc is full or you stop recording.
This unit cannot record images as aspect ratio of 16:9. The 16:9 images will be recorded as 4:3.
When the unit clock has not been set, the space for a date and time of title names will be blank.
When you record a TV program, you have to select the TV channel audio beforehand. Only the selected channel
audio will be recorded. Refer to “Selecting TV Audio” on pages 34-35 for more details.
This unit cannot record in both stereo and SAP (secondary audio program) at the same time.
You cannot change the recording mode during the recording pause mode.
You can change a channel to be recorded during the recording pause mode.
Note for one-touch timer recording
The remaining recording time will be displayed on the front panel display during one-touch timer recording. Press
[DISPLAY] to see it on the TV screen.
Unlike the timer recording, you can perform the following operations during one-touch timer recording.
- Turning the power to standby to stop one-touch timer recording.
- Using [REC] or [STOP C] on the remote control.
You cannot use the pause function during one-touch timer recording.
When one-touch timer recording is finished and the power is turned to standby, the unit will switch to the timer-
standby mode automatically if a timer recording has been programmed. Press [TIMER SET] to cancel the timer-
standby mode to use the unit continuously.