Owner`s manual

Channel List

The channels selected here can be skipped when selecting the

channels using CH +/-.

[hose channels can s_LIIbe selected with the Number buttons.

Use A/V to select [Channel List],then press OK,

Use A/V to select the channel you want to remove, then

press OK,

Antenna Confirmation

[hs funct on lets you check the digital sgnal strength of each

channel.

1 Use A/V to select [Antenna], then press OK.

_- Use the Number buttons or CH +/- to select the

channel for which you want to ched< the digital signal

strength.

• 7he channel d splay for the removed channel darkens.

You will not be able to select the channel again usng

CH +/-.

• [b reactivate a removed channel, use A/V and press

OK. fhe reg stered channels are highl ghted.

• When 7ou remove a main channel, its subchannels are

removed as well,

No/e

• The channe with the [DTV] Jrld cated on the d splay JsKTSC,

Othewse the channe s NTSC,

• If the charlne is set to analog channel or ext@nal it,put, you

cannot confirm the antenna condt on,

Add Channels

[his function lets you add the offthe air along NISC or analog

Cable channels that were not added by the autoprogram due

to reception conditions at the intal setting.

1 Use Air to selec± [Add Channels],then press OK.

_- Use the Number buttons to enter the number of the

channel you want to add, then press OK,

1 Use A/y to select the item you want to adjust, then press

OK.

Closed Caption