Manual

iS TV can be used as a PC Monitor. Your computer will have
be equipped with a VGA type video output and VGA cable.
Connect one end of the VGA Video cable to the Monitor
(video) output on the computer to the PC Input (VGA) jack
on the bottom of the TV.
Although audio connections are not required, the TV can
reproduce the computers audio out by an AUDIO
ADAPTER to the Audio output jack on the computer (if
available) while connecting the other ends of the Audio
cables to the Audio In left and right (PC/HD) Input Jacks
on the bottom of the TV.
Turn the TV and the Computer ON.
Press the PC Mode button to set the TV into the HD
Mode and tune to the computer's signal.
Note: Please contact your dealer or Philips at 800-531-0039 for
information about purchasing the needed cables.
®®
®®®
BOTTOM OF TV
VGA CABLE
AUDIO
ADAPTER_
VGA/FtGB ]
Audio Out /
PC with VIDEO VGA OUT
ere are Audio/Video Input.lacks located on both sides of the TV
cated under removable panels. These.jack allow for extra acces-
sory device connections for items such as cameras or gaming stations.
Connect the VIDEO (yellow) cable to the VIDEO AV2 injack on the left rear of the TV. Connect the other end of the
VIDEO (yellow) cable to the VIDEO OUT jack on the back of
the accessory device being used. Note: An S-Video cable can
be used in place of the yellow Video cable if your device is
equiped with an S-Video Output. S-Video provides better video
playback.
Connect the AUDIO (red and white) cables to the AUDIO(left and right) AV2 in jacks on the left rear of the TV. Connect
the other ends of the AUDIO (red and white) cables to the
AUDIO (left and righ0 OUT jacks on the rear of the accessory
device being used.
Turn the accessory device and the TV ON.
5
Press the SOURCE button on the remote control repeatedly
to select the AV2 channel for the accessory device, AV2 will
appear in the upper left comer on the TV screen when tuned
properly,
With the accessory device ON, press the PLAY button to acti-
vate the playback on the television,
©
®®
_°°0®
®®@@
@®®
®®®
@®@
JACK PANEL
BACK LEFT OF TV
out
VlOEOout Vl_nE0
Monitor AV2
out in
AUDIO CABLES
(Left and Right)
AN S-VIDEO CABLE CAN BE
USED IN PLACE OF THE
YELLOW VIDEO CABLE IF
DESIRED.
ACCESSORY DEVICE
(Camera., DVD, VCR, etc.)
VIDEO CABLE
AUDIO VIDEO
RIGHT LEFT S-VIDEO
ACCESSORY DEVICE
JACK PANEL
Ch like the AV2 jacks', the AV3.jacks" allow _br extra accessory
vice connections for items such as cameras or gaming stations.
The AV3 Input Jacks am located on the right mar of the TE.
Connect the VIDEO (yellow) cable to the VIDEO AV3 in jackon the fight rear of the TV. Connect the other end of the
VIDEO (yellow) cable to the VIDEO OUT jack on the back of
the accessory device being used. Note: An S-Video cable can be
used in place of the yellow Video cable if your device is equiped
with an S-Video Output. S-Video provides better video playback.
Connect the AUDIO (red and white) cables to the AUDIO
(left and right) AV2 in jacks on the right rear of the TV. Connect
the other ends of the AUDIO (red and white) cables to the
AUDIO (left and right) OUT jacks on the rear of the accessory
device being used.
Turn the accessory device and the TV ON.
Press the SOURCE button on the remote control repeatedly to
select the AV3 channel for the accessory device. AV3 will appear
in the upper left corner on the TV screen when tuned properly.
With the accessory device ON, press the PLAY button to acti-vate the accessory device (DVD, VCR, CAMERA, etc.) and
view the playback on the television.
®®®
@®@
@©
AN S-VIDEO CABLE CAN BE
USEDIN PLACE OFTHE
YELLOW VIDEO CABLEIF
DESIRED.
ACCESSORY DEVICE
(Camera., DVD, VCR, etc.)
AUDIO
CABLES
(Left and
Right)
VIDEO CABLE
ACCESSORY DEVICE
JACK PANEL
TVCRe Monitor Mudio/Video) out jacks are groat for recording with a
or used to connect an external audio system for better audio.
For Audio System Connection:
Connect one end of the R(ight) and L(eft) AUDIO (MonitorOut) jacks located on the right rear of the TV to the R and L
audio input jacks on your sound system. Refer to the AUDIO
OUT control within the Directions for Use for FIXED or VARI-
ABLE settings.
Turn the TV and audio system ON. TV sound can be heardthrough the audio system
For Second VCR Connection/Recorder:
The following steps allow you to connect a VCR to record the pro-
gram while your watching it.
Connect one end of the yellow Video Cable to the Monitor
out VIDEO OUT plug on the left rear of the TV. Connect the
other end to the VIDEO IN plug on the second VCR.
Connect one end of the red and white Audio cable from theMonitor out L and R plugs on the left rear of the TV to the
AUDIO IN plugs on the VCR.
S Turn the VCR ON, insert a black VHS tape and it's ready torecord what's being viewed on the TV screen.
Audio System
Connection:
AV OUT
AUDIO L(eft) and R(ight)
Second VCR
Connection/Recorder:
VIDEO CABLE
(Yellow)
SECOND VCR
AUDIO CABLES (Red & White)
4
AUDIO CABLES
(Red & White)
AUDIO SYSTEM
with AUDIO INPUTS
Monitor OUT
VIDEO &AUDIO
L(eft) and R(ight)
JACK PANEL
Located on the back left of the
TV