Manual

y_ur TV remote can be set to work various
_ternal devices such as VCRs, Cable
Boxes, Satellite Receivers, DBS, DVD, etc. by
what is called the search method qf remote
control programming,
If the "Remote Cod_" number method shown
on the previous page did not set your remot_
to work your external dmice, then,f!)llow the
easy stcT)s listed below,
Please r_ad steps l-4 b@Jre beginning,
Press the POWER button on the
device your are attempting to program
to turn it ON,
2
3
Place the TV/DVD/ACC Mode
Switch in the proper position.
Press the • RECORD and the AUTO
SOUND buttons simultaneously and
hold them down, The remote will con-
tinue to send programming codes, one
ever 1.5 seconds.
4
The device will begin to change chan-
nels after the remole identifies the cor-
rect code, When the channels start to
change release the • RECORD and
AUTO SOUND buttons, The remote
should be ready to operate the device,
This method can take several minutes to per-
form.
Don't let the device scan up more than five
channels, tf you do the remole may pass up
the right code and another search cycle will
have to be repeated.
If no channel change happens within two
minutes, repeat sleps 1-4, Should a channel
change still not occur, the remote will not
work 1he desired device.
NOTE: Setting up 1he remote is for use wfih
external accessory devices only and not for use
wfih other television brands.
Satellite Receiver
Cable Converter
O9
VCR
O9
©
O0
®
ooo6
OOO
OOO
OOO
©
41