Owners Manual

16
1.2 Rear
DC IN
AUX IN
WLAN
SET
OFF
AUX LAN
TVDesktop MP3/
Smart phone
DC IN
• SET ( RESET/ WPS Mode): Press briefly to activate WPS mode; press and hold for about 5 sec. to
restore the speaker to the factory settings.
• DC IN : Socket for mains power adapter. Connect the power adapter to power on the system
automatically.
• AUX-IN: Audio input, 3.5mm stereo socket
• Battery ON/ OFF: When operating w/o a power adaptor, switch OFF to save the battery power and
switch ON to power on the system.
• LAN: Ethernet LAN connection to connect your speaker to a LAN port of a router instead of WLAN
network.
1.3 LED Status
Button/LED Display Status
STANDBY Lights up Red Standby mode after 15mins w/o any audio signal
inputs
Battery Low Power Flashes red Battery low power w/o DC adaptor connected
AUX IN Lights up Orange Connected via LINE-IN
SET Flashes Green/Blue
Slowly
1. Reset to factory default
2. Firmware update
WLAN Flashes White 1. Booting process
2. WPS is processing
Lights up solid White 1. System is ready for WLAN connection
2. Play Modus
VOL -/+ Flashes volume increase/decrease
MUTE Flashes Slowly Mute
1.4 LED on the rear to show battery charging status
LED Display Status
Flashes red Battery Charging
Charging indicator Solid red Full Charged
Off Unplug DC adaptor