Operation Manual
Dear MAGNAT Customer,
B
LACK CORE TWO / BLACK CORE TWO LTD car hi-fi power amplifier will enable you to satisfy your high
demands on sound reproduction in your car. With its impressive deep-bass power reserves, low harmonic content
and neutral reproduction, BLACK CORE TWO / BLACK CORE TWO LTD takes car hi-fi to new heights. The
amplifier is characterized by low operating current, rapid switching capabilities and excellent temperature
s
tability. Increased output power can be achieved by switching two amplifier channels in an amplifier together in
bridging mode. Experience and enjoy how this high-tech machine perfectly reproduces magnificent sound.
Please read all of the owner’s manual before installing and using the amplifier.
1. TECHNICAL DATA BLACK CORE TWO
Stereo / Bridged
Max. output power (1 kHz sinus burst 2:8, B+=14.4V) 2 x 200 W / 1 x 600 W on 4 Ohm
Nominal output power (DIN 45 324, B+=14.4V) 2 x 65 W / 1 x 200 W on 4 Ohm
Max. output power (1 kHz sinus burst 2:8, B+=14.4V) 2 x 300 W on 2 Ohm
Nominal output power (DIN 45 324, B+=14.4V) 2 x 100 W on 2 Ohm
Loudspeaker impedance (stereo) 2 – 8 Ohm
Frequency response 5 – 50 000 Hz (-3 dB)
Total harmonic content (DIN 45 403) < 0.05% (1 kHz)
Stereo separation (IEC 581 ) > 60 dB (1 kHz)
Weighted noise distance (IEC A) > 100 dB
Input sensitivity LOW LEVEL INPUT 400 mV – 4 V
Input impedance LOW LEVEL INPUT 20 kOhm
Low-pass filter 40 – 300 Hz, 12 dB per octave
High-pass filter 40 – 300 Hz, 12 dB per octave
Bass boost 0…12 dB at 45 Hz
Supply +12 V (10 – 14,4 V), minus to ground
Fuse 1 x 25 A
Sizes (W x H x D) 234 x 54 x 215 mm
Weight 2.1 kg
BLACK CORE TWO LTD
Stereo / Bridged
Max. output power (1 kHz sinus burst 2:8, B+=14.4V) 2 x 300 W / 1 x 800 W on 4 Ohm
Nominal output power (DIN 45 324, B+=14.4V) 2 x 90 W / 1 x 300 W on 4 Ohm
Max. output power (1 kHz sinus burst 2:8, B+=14.4V) 2 x 400 W on 2 Ohm
Nominal output power (DIN 45 324, B+=14.4V) 2 x 130 W on 2 Ohm
Loudspeaker impedance (stereo) 2 – 8 Ohm
Frequency response 5 – 50 000 Hz (-3 dB)
Total harmonic content (DIN 45 403) < 0.05% (1 kHz)
Stereo separation (IEC 581 ) > 60 dB (1 kHz)
Weighted noise distance (IEC A) > 100 dB
Input sensitivity LOW LEVEL INPUT 400 mV – 4 V
Input impedance LOW LEVEL INPUT 20 kOhm
Low-pass filter 40 – 300 Hz, 12 dB per octave
High-pass filter 40 – 300 Hz, 12 dB per octave
Bass boost 0…12 dB at 45 Hz
Supply +12 V (10 – 14,4 V), minus to ground
Fuse 2 x 15 A
Sizes (W x H x D) 284 x 54 x 215 mm
Weight 2.5 kg
SUBJECT TO TECHNICAL CHANGE
GB
8