User`s manual

35
Basic Operations of UPIC Touch&Draw
This section describes the basic operations in UPIC Touch&Draw. For details, please click
theHelpfunctionofthetoolbar.
These basic operations are performed after calibration is completed and UPIC Touch&Draw
has been started up. If UPIC Touch&Draw is not started up, see “Starting up and quitting
UPIC Touch&Draw” on page 30.
Example:Conductingapresentationintheoverlayscreenmode.
The operations are performed on the picture projected on the wireless interactive panel.
1
Select the [Screen Mode] icon from
the toolbar.
The screen mode set when UPIC Touch&Draw is
started up is the [Overlay Screen] mode.
To use the white screen mode, click the [Screen
Mode] icon and switch to the [White Screen]
mode.
2
Operate Windows to display the pre-
sentation documents over the entire
screen.
Click the [Mouse] icon on the toolbar and open
the desired presentation file.
3
Use the digital pen to write words and
figures.
Click the [Marker] icon on the toolbar and write
with the digital pen.
To change the marker color, click the [Color]
icon and select the desired color. To change the
thickness of the lines, click the [Style] icon and
select the desired setting.
4
Inserting an image.
Prepare the image beforehand.
1) Click the [Insert Picture] icon on the toolbar
to display the “Open File” window.
0
1000
2000
3000
4000
5000
6000
7000
Office AOffice COffice EOffice G
Amount
Sales
National Sales Figures
0
1000
2000
3000
4000
5000
6000
7000
Office AOffice COffice EOffice G
Amount
Sales
National Sales Figures
Continued on next page