User`s manual

34
1
Click “Close” on the UPIC
Touch&Draw window’s toolbar.
When operating using the image projected on the
panel, click “Close” on the toolbar.
2
UPIC Touch&Draw is closed, and
the “Confirm closing” message is
displayed.
The message differs, depending on whether or not
there is unsaved data.
If there is no unsaved data:
[Yes] Click this to quit UPIC Touch&Draw.
[No] Click this to cancel quitting.
If there is data that has not yet been stored:
[Yes] When this is clicked, the Windows “Save
as” window appears. UPIC Touch&Draw
is closed after data storage is completed.
[No] When this is clicked, UPIC Touch&Draw is
closed without storing the data.
[Cancel] Click this to cancel quitting.
3
Put the cap on the digital pen.
Quitting UPIC Touch&Draw