User`s manual

29
• Thedigitalpenautomaticallyswitchesoffwhennotusedforabout7minutes
with the cap removed.
• Touseagaincapthepenanduncapittoactivate.
Always cap the pen when at no use to avoid battery consumption.
• Use4:3aspectratioforUPICNotepad.
User
Adjusts the PC screen to the draw area of Notepad calibrated in “User Setting”.
1
Uncap the digital pen
The indicator of the digital pen flickers. When lit up, no
pairing (connection) with the PC is established. (see
page 17)
2
Slip the material for calibration in
between the Notepad
Please print out the material using the Office Printing
add-in. (see page 38) In normal printing, the positional
information may not be readable.
3
Ca l ibrat e t h e re a d posi t i on of the
Notepad and the PC screen
Touch the Calibration icon ( ) of the Notepad to
display the Calibration screen on the PC and select
“User Setting”.
Touch the marks of the paper slipped in between
the Notepad in line with the calibration screen
display.
• Everytimeyoutouch,blinkingmovesinorderoftop
left → bottom left → bottom right → top right.
The calibration is now complete.
• To cancel, please press the [Esc] key of the
keyboard. You will return to the Calibration menu.
UPIC Notepad
UPIC Notepad
UPIC Notepad
NOTICE