User`s manual

Spotlight A checkmark is placed by clicking, and a spotlight appears. To quit, display

the pop-up menu again and remove the checkmark.

 • Whendragging,thepositionofthespotlightmoves,andwhentouching-

up, the spotlight disappears.

 • Toselecttheshape,sizeandsoonofthespotlight,[Settings][VLP]

tab [Spotlight].

Calibration/Cancel Byclicking,thecalibrationpattersappear.Forthecalibrationmethod,

please see page 28.

Calibration at Startup Byclicking,acheckmarkisplaced,andwhendetectingtheconnectionof

the digital pen, a calibration patter appears. (initial setting: ON)

Settings Openthesettingscreen.ByclickingthetabsofDeviceSettings,VLPandRegister

Command, it changes to your destination screen. If ”Use UPIC only” is selected at Device

Settings,“RegisterCommand”doesn’tappear.

Device Settings screen

Mode: You can select one of them. A checkmark is placed at the radio button

by clicking

“Use UPIC only”……To select when using this product (M model or F

model) only.

“Use UPIC Notepad only”…To select when using the UPIC Notepad,

which is only sold separately.

“Use both”…… To select when using this product and the UPIC

Notepad, which is sold separately, simultaneously.

Select Monitor: Selecting the screen for the monitor number connected to the projector

or the display is displayed. Search with an initial setting of “Display 1”.

OK button: To close the setting menu and store the changes.

Cancel button: To close the setting menu without storing the changes.

Apply button: This is selectable when the setting contents are changed and intended

to store the changes with the setting menu open.