User`s manual

14
Installation of the provided software
“UPIC Utility and UPIC Touch&Draw are installed when Installation of Software” is
selectedfromtheincludedCD-ROM’smenu.
When installing the Microsoft Office add-in, please select “Installation of Microsoft Office
add-in”fromthemenusoftheCD-ROMprovided.
Check before installing•
1. Check that the computer being used satisfies the required operating conditions.
2. When installing, do so with the authority (account) of the computer’s administrator.
3. Close any other running applications.
Installing UPIC Utility and UPIC Touch&Draw•
Cautions on installation
• Depending on the parameters of the computer being used, a
messageaskingyoutoconfirmwhetherornottoallowexecu-
tion of active contents may appear (ex: “Allow execution of
active contents?”). If so, select [Yes] to proceed.
NOTE: A security warning may appear. If so, select [Execute]
andproceedtothenextstep.
• WhentheincludedCD-ROMisfirstinstalledonacomputerrunningonMicrosoftWindowsXP,
the message below may appear:
If so, be sure to select [Yes (Y)], and install “Microsoft .NET 2.0 Framework”. Some time is
required for installation (about 10 minutes).
If [No (N)] is selected, the programs may not be properly installed.
1
Insert the included CD-ROM into the computer’s CD-ROM drive.
A menu screen appears automatically.
If the screen does not appear automatically, open the CD-ROM folder and double-click
“Autorun.exe”.
2
Click “Installation of Software”.
The installer is launched.
Continued on next page