User`s manual

12
When using the UPIC Notepad only
Preparetion before use/how to quit
1
Install the software on the PC using the CD-ROM provided.
(see page 15)
2
Make the computer recognize the digital pen (pairing). (See page 17.)
 * AcommerciallyavailableBluetoothUSBadapterisrequiredifthecomputerisnotequipped
withtheBluetoothfunction.
* When using multiple digital pens, pair all the digital pens with the computer.
3
Calibrate the PC and Notepad (see page 27)
4
Set (check) the operation mode of the UPIC utility.
Select “Use UPIC Notepad only” for [Mode] of the device setting.
5
Start up UPIC Touch&Draw.
Now Notepad is ready for use.
When using with output paper between Notepad, using a Microsoft Office add-in, please
print out the PowerPoint materials after installing the provided software “Office Printing
Add-in” (see page 38)
After use
1. Close the software. (See page 34.)
2. Put the cap on the digital pen.
The digital pen’s power turns off.
3. Place the UPIC Notepad in the dedicated carry case.
NOTICE
When using a computer on which steps 1 and 2 have been completed, start the preparations
from step 3.