User Manual
7
Enhanced Cleaning
Dentures
1. To remove tobacco, tea, or coee stains from dentures, add half a piece of a denture cleaning
tablet (denture cleaner has a better cleaning eect) to the tank’s water.
2. Run for 5-10 minutes following the “Using Your Cleaner” instructions on pg 6.
Retainers
1. To clean retainers, add a 1/4 of a denture cleaner tablet to the water.
2. Run the cleaner for 5 minutes, following the “Using Your Cleaner” instructions found on pg 6 to
remove odor.
Tarnished Gold Alloys and Copper
1. Add tap water to the tank at a level between MIN and MAX lines shown inside the tank.
2. Add 0.5 oz of citric acid to the water.
3. Put your items fully into the water/citric acid mixture inside the tank.
4. Start the automatic timer by pressing the power button once.
IMPORTANT: Empty the tank and add clean water. Run for another 5 minutes to remove chemical residue
Tarnished Silver Items
1. For items that are not tarnished heavily, use a silver cleaning cloth to rub o tarnish then clean
following the “Using Your Cleaner” instructions on pg 6.
2. For items that are tarnished heavily, soak the items in tarnish remover (according to its
instructions), then clean using the “Using Your Cleaner” instructions to remove any chemical
residue.
Care and Maintenance
• Do not run cleaner without at least 142 ml (0.6 cups) of water in the tank. This will damage the
unit.
• Do not run the cleaner for extended periods of time or continuously for over 15 minutes.
• Stop for approximately 10 minutes in between cleaning cycles to prolong the life of this cleaner.
• Only pour water out of the tank from the side of the cleaner. Avoid the front button and back
power cable area.
• Use a dry paper towel or cloth to wipe the tank and the housing.
• Leave lid o until dry.
• Store this cleaner in a dry, cool, and ventilated area.