User Manual

MAGNAFLOW: 22961 Arroyo Vista - Rancho Santa Margarita, CA 92688 | 1(800) 990-0905
Technical Support: 1(800) 959-9226 | Email: [e-mail]
Step 3. Begin installation of the new system by loosely
attaching the Resonator Assembly to the catalytic
converter outlets using the OEM clamps.
Step 4. Next, attach the Driver and Passenger Side
Extension Pipes (as shown) to the Resonator Assembly
using the supplied 2.50" clamps.
Step 5. Finish by attaching the Muffler Assemblies to
the extension pipes using the supplied 2.50" clamps and
fitting the hangers into the rubber insulators. Replace
crossmembers and chassis stiffeners.
Step 6. Once a final position has been chosen for the
new exhaust system, evenly tighten all clamps from front
to rear using the torque specifications on page one of the
instructions. Inspect all fasteners after 25-50 miles of
operation and re-tighten if necessary.